HP StorageWorks Auto Path for AIX, v04.02 - Installation Guide (B7949-96005)

14 HP StorageWorks Auto Path for AIX: Installation Guide
Installation
Installation procedure
Configure the disk array LUNs to be accessible to at least one port in each cluster
of the array. That is one port in CL1 and the other in CL2.
Make the appropriate connections between the host HBAs and the disk array
ports.
Configure host bus adaptors (HBA) and switches if used. See the HBA product
documentation for the method and contents of settings. If Fibre Channel is
connected, verify that the connection method (such as Fabric or AL) matches the
settings.
Install VisualAge C++ (version 5.0.0.0 or later) filesets on the host if required.
AIX 4.3.3 software may be obtained at:
http://www-1.ibm.com/support/docview.wss?org=SW&doc=4001173
For AIX 5.1and AIX 5.2, the software is available on their respective install
media.
To install Auto Path:
1. Log in with root authority.
2. Create the /var/DLM directory.
# mkdir /var/DLM
3. Create the dlm.lic_key license key file.
Example # echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
where the license key is 123456789ABCDEF.
If preferred, you can use vi to edit the file.
4. Insert the CD into the drive.
There is no need to mount the CD.
5. Execute the install command.
# installp –aXgd /dev/cd0 all
Or in place of /dev/cd0, specify the special file of the installation medium.
Follow the display prompts to complete the install.