HP StorageWorks Auto Path for AIX V04.40 Installation Guide (B7949-96008, August 2004)

Installation 17
3. Insert the CD into the drive.
There is no need to mount the CD.
4. Execute the install command:
# installp –aXgd /dev/cd0 all
Alternatively, you can specify the special file of the installation
medium in place of /dev/cd0.
5. Verify that the package was installed:
# lslpp -L AutoPath.rte
Verify that AutoPath.rte appears among the file set items in the
output list and that its status is C (Commit). See the readme file on the
Auto Path for AIX CD for the current level.
6. (Optional) Add the PATH environment variable to the execution
environment:
Bourne shell or Korn
shell
# PATH=$PATH:/usr/DynamicLinkManager/bin
# export PATH
C shell # set path=( $path /usr/DynamicLinkManager/bin )
If you want, you can edit the PATH statement in the root .profile.
7. Define the physical volumes to be managed by Auto Path.
If you want to let the DLM driver recognize all volumes that can be
managed by the DLM driver, this step is unnecessary. Continue with
step 9.
To limit the volumes to be managed, you may either specify the
volumes to be managed or specify the volumes you do not want
managed.
Example To specify the volumes to be managed, enter the logical names of
these volumes (hdisks) in the configuration file:
/usr/DynamicLinkManager/drv/dlmfdrv.conf
Enter all hdisk references for paths to the same LUN. If only volumes
hdisk5 and hdisk7 are used with Auto Path and reference paths to the
same LUN, dlmfdrv.conf will contain the following: