HP StorageWorks Auto Path for AIX V04.40 Installation Guide (B7949-96008, August 2004)

Installation 21
7. Execute the install command:
# installp –aXgd /dev/cd0 all
Alternately, you can specify the special file of the installation medium
in place of /dev/cd0.
8. Verify that the package was installed:
# lslpp -L AutoPath.rte
Verify that AutoPath.rte appears among the file set items in the
output list and that its status is C (Commit). See the readme file on the
Auto Path for AIX CD for the current level.
9. Verify that the dlmfdrv.conf or dlmfdrv.unconf file is in the
/usr/DynamicLinkManager/drv directory.
10. Activate the Auto Path subsystem:
# dlmcfgmgr
A system reboot also activates the Auto Path subsystem
(DLMManager).
The dlmfdrv device files are regenerated as configured in the
dlmfdrv.conf or dlmfdrv.unconf file.
11. Activate all of the Auto Path (HDLM) volume groups.
Example
# dlmvaryonvg dlmvg01
12. Make the mount point available.
Example
# mount /tmp/dlmvg01_fs