HP StorageWorks Auto Path for AIX, v04.02 - Installation Guide (B7949-96005)

23HP StorageWorks Auto Path for AIX: Installation Guide
Configuration and operation
■ The dlnkmgr online command or automatic failback returns the Online(E)
path online only.
Using the dlnkmgr online command
If –pathid is not specified in the dlnkmgr online operation, all the paths in hold
state are subject to online processing. If there is a path that cannot be recovered,
the following message is output:
A path which failed to go online was detected during
online operation of the KAPL01039-W DLM command. Do
you want to continue the PathID = %d online
operation? [y/n]? Enter "y" to continue the
operation, or "n" to abort it.
When –s is specified, the operation is continued in an assumption that y is
specified.
Executing the dlnkmgr view –path command can show the status of the LUN
paths.
# dlnkmgr view –path
Identifying the DLM driver volumes
To view the hdisks that belong to a dlmfdrv device, execute the following
command:
# dlnkmgr view –drv