3.6.0 Matrix Server Installation Guide (5697-7079, February 2008)

Chapter 3: Install PolyServe Matrix Server 27

1. Remote Management Controller Vendor. Select the vendor for your

Remote Management Controller. For an IBM Blade Center, also

specify the Blade slot.

2. Remote Management Controller ID. Specify how Matrix Server

should identify the Remote Management Controller associated with

each server. Use one of the following methods.

– Enter the hostname or IP address for the Remote Management

Controller associated with this server. You will need to use this

method if your Remote Management Controllers are from different

vendors. This method must also be used for IBM BladeCenter

servers.