3.6.0 Matrix Server Installation Guide (5697-7079, February 2008)

Chapter 3: Install PolyServe Matrix Server 28

– Select “Cluster-wide Pattern” and then specify the common

naming scheme that you are using for the Remote Management

Controllers (either a hostname suffix or an IP address delta, as

described below).

Hostname Suffix. Specify the common suffix to append to each

server name to determine the associated Remote Management

Controller name. For example, if your server names are server1

and server2 and their Remote Management Controllers are

server1-iLO and server2-iLO, enter -iLO as the suffix.

IP Delta. Specify the delta to add to each server’s IP address to

determine the IP addresses of the associated Remote Management

Controllers. For example, if your servers are 1.255.200.12 and

1.255.200.15 and their Remote Management Controllers are

1.255.201.112 and 1.255.201.115, enter 0.0.1.100 as the delta.

3. Remote Management Controller Access. Matrix Server needs to log

into a user account on the Remote Management Controller in order to

fence the server. Specify the user name and password for the account

that you want Matrix Server to use. The account must currently exist

on the Remote Management Controller.

Next, go to the Advanced tab and select the appropriate options.