3.6.0 Matrix Server Installation Guide (5697-7079, February 2008)

Chapter 3: Install PolyServe Matrix Server 31
Copyright © 1999-2008 PolyServe, Inc. All rights reserved.
Repeat this procedure to specify the remaining FC switches, including
cascading switches.
2. SNMP Community String. The default SNMP community string for
Matrix Server is private. If you want to use a custom community
string, enter the appropriate value here. The SNMP community string
must be set to the same value on Matrix Server and on the SAN
switches configured above.
When the SAN & Fencing tab is complete, go to the Storage Settings tab.
Storage Settings Tab
The Storage Settings tab allows you to select membership partitions,
which Matrix Server uses to control access to the SAN, and to create a
snapshot configuration for taking hardware snapshots.