3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

• mxconsole_3.7.0.<xxxx>.msi. The Management Console and mx utility in
Microsoft Windows format.
• pmxs-quota-tools-3.13-<xxxx>.src.rpm. Linux quota commands modi-
fied for use on the PSFS filesystem.
• pmxs-quota-tools-3.13-<xxxx>.<arch>.rpm. Linux quota commands
modified for use on the PSFS filesystem.
• pmxs-quota-tools-3.13-<xxxx>.src.rpm. The source for Linux quota
commands modified for use on the PSFS filesystem.
• mxsperfmon-3.7.0-<xxxx>.<arch>.rpm. The Performance Dashboard
software.
The FS Option distribution includes these files:
• mxfs-3.7.0-<xxxx>.<arch>.rpm. The FS Option for Linux software.
• mxfs-cifs-3.7.0-<xxxx>.<arch>.rpm. The Samba deployment kit.
• mxfs-<os>-support-3.7.0-<xxxx>.<arch>.rpm. The FS Option support
RPM.
Installation procedure
Before starting the installation, be sure to review the configuration and hardware
requirements specified in Chapter 1, page 9.
Installation checklist
HP Scalable NAS and FS Option for Linux (if used) must be installed on each server
in your cluster. Complete the following steps, which are described in detail following
this checklist.
DescriptionAction
Set up the storage array, create LUNs for use as
HP Scalable NAS membership partitions, and
configure the FC switches that will be under
cluster control.
Set up the SAN configuration.
Install a supported operating system and modify
the necessary system files.
Install the operating system.
HP Scalable NAS File Serving Software installation guide 17