3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

• Vendor and type selections apply to all servers. This option is enabled by default.
Disable the option if your Remote Management Controllers are from different
vendors or if, in the case of IBM Remote Management Controllers, some are as-
sociated with IBM BladeCenter servers and others are not.
• Login shared by all servers. Check this option if all servers in the cluster will be
sharing the login account that you specified on the Remote Management Controller
tab. If the login is not shared, you will be asked for the appropriate logins when
the other servers are added to the cluster.
Fencing action. When a server needs to be restricted from the SAN, HP Scalable
NAS can either power-cycle the server or shut it down. Select the method that you
want to use.
If you have Fibre Channel-connected storage and want to configure your Fibre
Channel switches into the cluster, go to the Switch Information tab. (This step is
optional; however, if the switches are configured the HP Management Console can
display the switch ports used by the SAN.)
Install HP Scalable NAS and FS Option for Linux40