3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

SAN Switches. Specify the hostnames or IP addresses of the Fibre Channel switches
that are directly connected to the nodes in the cluster. Click Add, and then specify
the hostname or IP address of the first FC switch.
Repeat this procedure to specify the remaining FC switches, including cascading
switches.
SNMP Community String. The default SNMP community string for HP Scalable NAS
is private. If you want to use a custom community string, enter the appropriate value
here. The SNMP community string must be set to the same value on both HP Scalable
NAS and the SAN switches configured above.
When you have completed the information, go to the Storage Settings tab.
Storage Settings tab
The Storage Settings tab allows you to select membership partitions, which HP
Scalable NAS uses to control access to the SAN, and to create a snapshot
configuration for taking hardware snapshots.
HP Scalable NAS File Serving Software installation guide 41