3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

For Engenio arrays, you will be asked for the hostnames or IP addresses and password
for your storage array controllers.
Apply the configuration. When you have completed your entries on the Storage
Settings tab, click Apply (at the bottom of the Configure Cluster window). You will
then see a message stating the operation will erase all of the data on the membership
partitions. Click Yes to continue.
The configuration is then saved on the server that you are using to connect to the
Management Console. You will then be asked whether you want to start the HP
HP Scalable NAS File Serving Software installation guide 45