3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

IMPORTANT:
The mx config check command can be used between the steps of the sequence
to validate the configuration. It is especially important to run the command before
issuing the start and export commands. Be sure to correct any issues reported
by the mx config check command before continuing with the sequence.
The command sequence is:
mx --matrix nodeA config loaddrivers
mx --matrix nodeA config license <file name>
mx --matrix nodeA config secret <alphanumeric key>
mx --matrix nodeA config protocol [Multicast|Unicast]
mx --matrix nodeA config santype [fc|iscsi]
mx --matrix nodeA config fcswitch [--community <string>] <switch> ...
(This command is optional for santype fc and not applicable for
santype iSCSI.)
mx --matrix nodeA config webfencing --ruser <user name> --vendor <vendor>
--mixedvendor yes|no --hostname <name>|--hostsuffix <suffix>|
--ipdelta <delta> [--type reset|shutdown] [--bladeslot <slot>]
[--sharedlogin yes|no] [--rpassword <password>]
mx --matrix nodeA config mp set <uuid1/partno> [<uuid2/partno> <uuid3/partno>]
mx --matrix nodeA config snapshot add --method <type> [--options
<method options>]
(This command is needed only if you will be using the snapshot feature.)
mx --matrix nodeA server add nodeA
mx --matrix nodeA server start nodeA
mx --matrix nodeA config description <description>
The cluster is now configured and HP Scalable NAS is running on nodeA. Repeat
the following set of commands to add the remaining nodes to the cluster and export
the configuration to them.
mx --matrix nodeA server add <nodename>
mx --matrix nodeA config export <nodename>
Now configure web management-based fencing on the nodes just added to the
cluster. For each node, specify the appropriate fencing information.
mx --matrix <nodename> config webfencing --ruser <user name>
--vendor <vendor> --mixedvendor yes|no --hostname
<name>|--hostsuffix <suffix> |--ipdelta <delta> [--type
reset|shutdown] [--bladeslot <slot>] [--sharedlogin yes|no]
[--rpassword <password>]
HP Scalable NAS File Serving Software installation guide 75