3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

# Cluster Details
# Start Node
MATRIX="nodeA"
# Other Nodes
NODES="nodeB nodeC nodeD"
# Fibre Channel Switch Information
SWITCHES="99.10.180.253"
# Membership Partitions
MP="6-6005-08B3-0090-A860-22BE-8098-CC0A-0041/1 6-6005-08B3-0090-A860-22BE
-8098-CC0A-0041/2 6-6005-08B3-0090-A860-22BE-8098-CC0A-0041/3"
# License File
LICENSE="permanent.lic"
# Community SNMP String used by Switches
COMMUNITY="public"
# The Secret Network Key
SECRET="secret"
# Authentication Information
USER="root"
PASSWORD="<password>"
Command descriptions
The mx commands used in the configuration specify the following information.
mx config loaddrivers
Load the HP Scalable NAS pmxs drivers.
mx config license <file name>
The location of the HP Scalable NAS license file. The file must be present on the
server running the command.
mx config secret <alphanumeric key>
This password provides additional security for network communications among
the servers in the cluster. The password can contain up to 127 characters.
mx config protocol Multicast|Unicast
The protocol used for cluster administrative traffic. The default is Multicast.
mx config santype fc|iSCSI
Whether the SAN uses Fibre Channel or iSCSI. The default is fc (for Fibre
Channel).
mx config fcswitch [--community <string>] <switch> ...
Configuring Fibre Channel switches is required for Fibre Channel switch-based
fencing and optional for web management-based fencing. Specify the hostnames
or IP addresses of the switches that are directly connected to the nodes in the
HP Scalable NAS File Serving Software installation guide 77