3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

Specify the hostname for the Remote Management Controller associated with
this server. You will need to use this method if your Remote Management Con-
trollers are from different vendors. This method must also be used for IBM
BladeCenter servers.
--hostsuffix <host suffix>
Specify the common suffix to append to each server name to determine the asso-
ciated Remote Management Controller name. For example, if your server names
are server1 and server2 and their Remote Management Controllers are server1-
iLO and server2-iLO, enter -iLO as the suffix.
--ipdelta <ip delta>
Specify the delta to add to each server’s IP address to determine the IP addresses
of the associated Remote Management Controllers. For example, if your servers
are 1.255.200.12 and 1.255.200.15 and their Remote Management Controllers
are 1.255.201.112 and 1.255.201.115, enter 0.0.1.100 as the delta.
--vendor <vendor>
The vendor for your remote management controller (dell, hp, ibm, or ipmi).
[--bladeslot <slot>]
For IBM Blade Center only, the blade slot.
--mixedvendor yes|no
Whether the vendor and type settings apply to all servers.
[--rpassword <password>]
The password for the Remote Management Controller.
--ruser <user name>
The Remote Management Controller user name.
[--sharedlogin yes|no]
Whether the login account is shared by all servers.
--type reset|shutdown
When a server needs to be restricted from the SAN, HP Scalable NAS can
either power-cycle the server or shut it down. Select the method that you
want to use (either reset or shutdown).
mx config snapshot add --method <type> [--options <method op-
tions>]
Configure a snapshot method. The options are:
--method <type>
The supported types are hpmsa2000, hpxp, hpeva, and engenio.
[--options <method options>]
HP Scalable NAS File Serving Software installation guide 79