3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

For hpmsa2000, specify the following:
--controllerA <ipaddress>
The IP address of controller A.
--controllerB <ipaddress>
The IP address of controller B.
--username <username>
The user name required to access the controllers.
--passwd <password>
The password required to access the controllers.
For hpxp, specify the following:
--instanceL <number>
The local instance (a number from 0 to 127).
--instanceR <number>
The remote instance (a number from 0 to 127).
For hpeva, specify the following:
--hostname <hostname>
The hostname for the management appliance.
--username <username>
The user name required to access the management appliance.
--passwd <password>
The password required to access the management appliance.
For engenio, specify the following:
--controllerA <hostname or IP address>
The hostname or IP address for controllerA.
--controllerB <hostname or IP address>
The hostname or IP address for controllerB.
--passwd <password>
The password for the storage array controller.
The mx config snapshot showtype command also lists the options available
for your snapshot method.
Configure the cluster from the command line80