4.0.0 HP PolyServe Management Pack for Microsoft System Center Operations Manager 2007 (T5392-96054, March 2010)

NOTE:
If the HP PolyServe Management Console does not start, log out of the Windows
Server, log in again, and then restart the console. This step adds the path for the
Management Console to your system environment path, enabling the console to
open properly.
Open issues
The following open issues affect the Management Pack.
DescriptionDefect
Multiple duplicate events appear in the event view
When SCOM picks up an alert, the event view may display multiple duplicate
events for the alert, although only one event was logged in the Windows
MatrixServer Application Event Log.
Workaround. Events that appear multiple times in the event view with exactly the
same information and timestamps likely indicate only one event. Check the alert
views to verify how many alerts are currently open.
19347
Critical server alerts are not cleared
When a server is fenced, its state is displayed as Critical on the Operations
Manager. After the server has been rebooted and the alert has been cleared from
the server, the Operations Manager may continue to display the critical alert.
Workaround. On the Operations Manager, place the affected node in maintenance
mode for five minutes. When the node comes out of maintenance mode, the alert
will be cleared.
26850
HP PolyServe Management Pack 15