HP Management Integration Framework Administrator Guide (T5494-96539, October 2012)

• If you change the setting, it must be in the range of 1 to 300000 milliseconds (5 minutes).

• Considerations. A short interval causes the Management Integration Framework software to

check for trees more often, which increases interface responsiveness but also increases network

traffic. A longer interval causes Management Integration Framework software to check for

trees less often, which decreases network traffic but also decreases interface responsiveness.

Local only

This tree integrator setting establishes whether tree content is limited to content from the local

machine or if tree content from other machines can be included.

• The local only setting applies only when the tree aggregation setting is enabled.

• The default setting is Not enabled for server-based HP P6000 Command View and Enabled

for array-based HP P6000 Command View.

SPoG session time-out

The SPoG is continually communicating with the SPoG server, unless there is a network problem.

This tree integrator setting establishes how long Management Integration Framework software

waits before ending a SPoG session. Timing is relative to the last communication with the SPoG

session.

• Typical use. To have Management Integration Framework software store SPoG session

information for longer or shorter periods of time.

• The default is 120 seconds (2 minutes).

• If you change the setting, it must be in the range of 1 to 3600 seconds (1 hour).

• Considerations. A short time-out removes session information sooner, which frees memory but

may cause slower tree updates.

Tree aggregation

This tree integrator setting establishes whether or not SPoG server functionality is enabled on the

machine.

• The default setting is Enabled.