HP P6000 Command View 9.4 Release Notes (T5494-96472, October 2011)

new WOCP feature that can be set so that the array boots up automatically when power is applied
after a full shutdown. To further clarify this feature:
◦ If this feature is disabled and you turn on power to the array from the rack power distribution
unit (PDU), only the disk enclosures boot up. With this feature enabled, the controllers will
also boot up, making the entire array ready for use.
◦ If, after setting this feature, you remove the management module from its slot and reinsert it
to reset power or you restart the management module from the WOCP, only the controllers
will automatically boot up after a full shutdown. In this scenario, you must ensure that the
disk enclosures are powered up first; otherwise, the controller boot up process may be
interrupted.
◦ After setting this WOCP feature, if you have to shut down the array, perform the following
steps:
1. Use HP P6000 Command View to shut down the controllers and disk enclosures.
2. Turn off power from the rack power distribution unit (PDU).
3. Turn on power from the rack PDU.
After startup of the management module, the controllers will automatically start.
Product websites and documentation
All documentation associated with this release is available on the Web. You can find the documents
on the Manuals page of the HP Business Support Center website:
http://www.hp.com/support/manuals
In the Storage section, click Storage Software, and then select HP P6000 Command View Software
under Storage Device Management Software.
Table 1 HP storage websites
HP websiteItem
http://www.hp.com/support/manuals. Select Disk Storage Systems under Storage, and then
select HP 3000 Enterprise Virtual Array under P6000/EVA Disk Arrays.
EVA3000
http://www.hp.com/go/eva4400EVA4400
http://www.hp.com/go/eva6484EVA6400/EVA8400
http://www.hp.com/support/manuals. Select Disk Storage Systems under Storage, and then
select HP 5000 Enterprise Virtual Array under P6000/EVA Disk Arrays.
EVA5000
http://h18006.www1.hp.com/storage/disk_storage/eva_diskarrays/eva_arrays/index.htmlEVA4000/4100
EVA6000/6100
EVA8000/8100
http://www.hp.com/go/p6000P6300/P6500
http://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.htmlHP P6000 Command View
http://h18006.www1.hp.com/products/storage/software/bizcopyeva/index.htmlHP P6000 Business Copy
http://h18006.www1.hp.com/products/storage/software/conaccesseva/index.htmlHP P6000 Continuous
Access
http://h18006.www1.hp.com/products/storage/software/repsolmgr/index.htmlHP P6000 Replication
Solutions Manager
An HP Command View EVAPerf white paper is also available from the following HP website:
http://h18006.www1.hp.com/storage/softwhitepapers.html
Product websites and documentation 17