HP P6000 Enterprise Virtual Array Compatibility Reference

EVA4400
(HSV300)
EVA4400 (HSV300-
S)
EVA6400 (HSV400)
EVA8400
(HSV450)
1
• • •
• • •
•
•
2
•
2,3
•
1
•
2
•
1,2
•
2
1
Includes EVA8400 HSV450 controller variations (14 GB cache and 22 GB cache).
P6350 EVA
(HSV340)
1,2
P6500
(HSV360)
2
P6550 EVA
(HSV360)
2
3.3 Data-in-place (hardware) upgrade support for EVA 4400/6400/8400 controllers
3.3.1 Data-in-place (hardware) upgrade support for P6300/P6350/P6500/P6550 EVA controllers
TO array controller
FROM array controller
TO array controller
EVA4400 (HSV300)
EVA4400 (HSV300-S)
EVA6400 (HSV400)
This table shows data-in-place upgrade support for when you upgrade the hardware. A bullet (•) indicates you can perform a data-in-place upgrade
from the array controller in the FROM column to the array controller in the TO column. A blank cell indicates a data-in-place upgrade is not supported.
NOTE: When doing a data-in-place upgrade, the old and new controllers must be running the same version of controller software. A data-in-place
upgrade must be performed offline.
This table shows data-in-place upgrade support for when you upgrade the hardware. A bullet (•) indicates
you can perform a data-in-place upgrade from the array controller in the FROM column to the array controller
in the TO column. A blank cell indicates a data-in-place upgrade is not supported.
NOTE: When doing a data-in-place upgrade, the old and new controllers must be running the same version
of controller software. A data-in-place upgrade must be performed offline.
P6500 EVA (HSV360)
1
Includes FC, iSCSI, and iSCSI/FCoE controller variations.
2
Requires 11001100 or later firmware, and HP Command View 10.3 or later.
3
Requires 11001100 or later firmware, HP Command View 10.3 or later, and new controller.
P6350 EVA (HSV340)
FROM array controller
P6300 EVA (HSV340)
17