HP StorageWorks EVA Hardware Providers administration guide Windows 2003 (T1634-96052, February 2006)

Configuring the EVA disk array
The following configuration steps are required only if you will use VSS to make volume
shadow copies. If you are only using VDS and will not use VSS, you can skip these
configuration steps.
• Log into Command View as an administrator (the default administrator user name
and passwor
disadm inistrator).
Adding VDS/VSS hosts
1. Click the + symbol next to the EVA disk array in the left panel to expand the contents
of the array and begin configuration.
2. Click the Hosts folder in the left panel. The Host Folder Properties window displays.
Click Add Host and fill in the host characteristics for the VDS/VSS server. Click Save
Changes to save the n ew host information. Repeat if you are adding a second
server.
26
Configuration