HP StorageWorks EVA Hardware Providers administration guide Windows 2003 (T1634-96052, February 2006)

If the nam e of the array d o es not appear, the log on is incorrect or a communication

problem has oc curred with the CV workstation. Check your logon and password and

check connectivity (for example, a ﬁrewall may be interfering with communication).

Also refer to “Chapter 4 Troubleshooting” for troubleshooting information.

Selecting the disk group:

1. For VDS, click on a disk group in the Disk Group List, and click Add to List to add

the group to the list of Selected Disk G roups available to VDS HWP. Then click OK.

For VSS, click Snapclone and click Select Dis k Group to o pen the list of disk groups

(below). Select the disk group you created for VSS co pies and click OK.

If no disk groups are listed, make sure you created the disk groups and presented

them to the server during conﬁguration.

For VDS, when you click OK, the Conﬁguration Utility window closes.

For VSS, the Conﬁguration Utility window appears as shown below.

Installation