HP StorageWorks EVA Hardware Providers quick start guide Windows 2003 (T1634-96053, February 2006)
Configuration summary
You will perform the following tasks during configu ration:
Windows CV workstation:
• Install HP MPIO FF Failover Manager (if multipathing is required).
• Use Command View EVA to activate the BC license.
VDS/VSS servers:
• Install Windows Enterprise OS, FC HBAs, drivers and software.
• Install HP MPIO Full-Featured Failover (if multipathing is desired).
• Connect to
the array’s FC SAN.
• Connect to the corporate Ethernet LAN (A firewall is optional but recommended.
The firewall must be open between ser vers.)
Disk array (Command View EVA):
• (VSSonly)Createasnapclonediskgroup(orusetheexistingproductiondisk
group) .
• (VSS only) Create other disk groups as required by your application. (Exchange
requires a data disk group and a log disk group.)
HP StorageWorks EVA Hardware Providers quick start guide Windows 2003
9