HP P6000 Replication Solutions Manager CLI Reference (T3680-96071, June 2012)

[m[embers]]
[refresh]
Switches
Displays properties of the specified DR group.dr_group name
When used instead of dr_group name, displays the properties of all data
replication groups in the array.
full
Displays a simple list of DR group names.list
Displays the members of the DR group.members
Performs a manual refresh of the DR group properties prior to other operations
that were specified in this command.
refresh
SHOW HOST_AGENT
The SHOW HOST_AGENT command displays the properties of the enabled host, such as cluster
software, HBAs, host volumes, mount points, and drive letters.
Syntax
sho[w] host_agent|ha <host_agent name>
[cluster]
[f[ull]]
[hba=<hba name>]
[hbas]
[host_volume|hv=<host volume name>]
[host_volumes|hvs]
[l[ist]]
[mount_point|mp=<mount point>]
[mount_points|mps]
Switches
Shows the cluster information for the specified enabled host.cluster
When used instead of the host_agent name, the interface displays details about
all the enabled hosts.
full
Displays information about the specified Host Bus Adapter (HBA).hba
Displays a simple list of the HBAs on the enabled host.hbas
Displays properties about the specified enabled host.host_agent name
Shows information for the specified host volume on the enabled host.host_volume
Displays the names of the enabled hosts without detailed information.list
Shows information for the specified mount point or drive letter on the enabled host.mount_point
Shows the mount points on the enabled host instead of the default volume information.mount_points
Example
show host_agent full
SHOW HOST_VOLUME
The SHOW HOST_VOLUME command displays the properties of the host volume. A host agent must
be installed on the specified host.
SHOW HOST_AGENT 37