HP StorageWorks Replication Solutions Manager V1.1 Release Notes (T3687-96026, June 2005)

c3::50001fe10015408d,0 array-ctrl connected unconfigured unknown

c3::50001fe10015408d,1 disk connected configured unknown

For each “unconﬁgured” Ap-I d per form the following commands:

#cfgadm —c configure c3::50001fe100270ad8

#cfgadm —c configure c3::50001fe100270adc

#cfgadm —c configure c4::50001fe100270ad9

#cfgadm —c configure c4::50001fe100270add

This conﬁguration procedure must be repeated each time a new EVA4000/6000/8000 storage array is

added to the SAN and is to be used with Solaris. Please see the documentation for Sun StorEdge SAN at

ww.sun.com/storage/san for more information on using and conﬁguring MPxIO.

Solaris enabled hosts require HBA driver libraries (SNIA)

If the required HBA driver libraries are not installed on a Solaris enabled host, incorrect HBA information

is reported in the replication manager HBA/ports tab of the Enabled H ost properties window. This

condition does not affect HBA operation, only the information reported to the replication manager.

Resolution: You must install HBA driver libraries on the host. The libraries c ome with HP Secure Path for

Sun Solaris but are not installed by default. The libraries are sometimes called SNIA libraries in reference

to the Storage Net working Industry Association standards regarding HBAs.

• For JNI and Sun native HBAs, install the JNI SNIA Fibre Channel HBA library. The package

name is JNIsnia.

• For QLogic HBAs, install the QLogic SDM libary. The package name is QLSDMLIB .

To install the HBA driver libraries:

1. Back up the ﬁles on the enabled host.

2. Check that vold, the volume management daemon, is running by entering:

ps –ea | grep vold.

3. If vold is running:

a. Insert the HP Secure Path v3.0D CD-ROM into the CD-ROM d rive

b. Check that the enabled host h as automatically mounted the CD-ROM, by entering:

mount

c. Change to the Solaris directory by entering:

cd /cdrom/sp_v30d_sun/solaris

d. Go to step 5.

4. If vold is not running:

a. Insert the HP Secure Path CD-ROM into the CD-ROM drive.

b. Mount the CD-ROM. For example, enter:

mount –f hsfs –r /dev/dsk/c0t6d0s2 /cdrom

c. Change to the Solaris directory by entering:

cd /cdrom/solaris

5. Install the HBA library packages.

• To install the HBA driver library for JNI and Sun native HBAs enter:

# pkgadd -d . JNIsnia