HP StorageWorks Replication Solutions Manager V1.1 Release Notes (T3687-96026, June 2005)

Windows enabled hosts with Emulex HBAs require an Emulex utility
WindowsenabledhostsrequireHBAdriverlibrariesthataredeliveredwithHPSANInfrastructure
products. If the enabled host has Emulex HBAs, an additional Emulex utility must be installed to access
the driver libr
aries. (Windows enabled hosts with QLogic H BAs do not require a n additional utility.)
Resolution: For Emu lex HBAs, you must install the Emulex utility LightPulse Utility/NT. The utility provides a
GUI that allows you to examine, manage and configure installed Emu lex HBAs.
To download and install the utility:
1. Browse to the Fibre Channel Host Bus Adapters section on the following HP storage web site:
h
ttp://esgcpqdev1.americas.cpqcorp.net:8030/storage/saninfrastructure.html
2. Select the HP product that corresponds to your Emulex HBA. The HBA page opens.
3. Select Soft ware, firmware & drivers. The Specify Operating System page opens.
4. Select the
Windows version of the Emulex HBA. The Download Drivers and Software page opens.
5. In the Util
ity FC HBA section, select LPuti lnt and click download.
6. After down
loading, copy the zip file to the enabled host, if necessary.
7. Follow the
utility installation instructions. The Emulex utility is added to the Start menu on the host.
8. To open th
e utility window, select Star t > LPUTILNT.
Unable to see disk in Windows Explorer after remount operation
When you unmount a h ost volume on a Windows platform and then mount back the drive letter, you may
not see the disk in the Windows Explorer. The mount and unmount operations complete successfully.
After the remount the drive is no t seen in the Windows Explorer. The disk partition is seen in the disk
management. Open and Explore operations on the par tition also fail.
Resolution: reboot the system.
16