HP P6000 Replication Solutions Manager Installation Guide (T3680-96092, October 2012)

IP configurations
The replication manager is designed for use with IP versions as follows:
• HP P6000 Replication Solutions Manager 4.0.1 or later—IPv4, IPv6, and mixed IPv4/IPv6
networks
• HP P6000 Replication Solutions Manager 4.0 or earlier—IPv4 networks only
To enable communication between HP P6000 Command View and the replication manager using
IPv6, you must configure HP P6000 Command View and HP SMI-S for IPv6.
NOTE: In a mixed IPv4/IPv6 network, ensure that HP SMI-S is set to the same IP version as HP
P6000 Command View.
To configure HP P6000 Command View for IPv6:
1. Using a text editor, open the file Sanworks\Element Manager for StorageWorks
HSV\config\cveva.cfg.
2. Enter a value in the IPv6 configuration address field.
3. Restart HP P6000 Command View.
The following example shows setting HP P6000 Command View IP address 1 to IPv6.
Section WebServer
{
# The port of SSL connections
# Default: 2372
port 2372
# The time limit on HTTP sessions in seconds
# Default: 3600 (1 hour)
# Set the value to zero to disable the timeout feature
timeout 3600
# The location of the web server help pages
help pages ./gui/help
navPaneRefreshInterval 45
contentPaneRefreshInterval 60
# the default OS that is shown for adding a new host
defaultOS Microsoft Windows
# IPv6 configuration
address ::1
}
To configure HP SMI-S for IPv6:
1. Run SMI-S\EVAProvider\bin\discoverer.bat.
2. When prompted to enter your choice, enter 1 (Add a CV IP).
3. When prompted, enter the IP address that you entered for the HP P6000 Command View
IPv6 configuration.
4. When prompted, enter your user name and password.
5. When the operation is complete, refresh the replication manager.
Connecting to EVA SMIS in http://localhost... Please wait...
______________________________MENU______________________________
1.Add a CV IP
2.Remove a CV IP
3.Get the list of CV IPs
0.Exit
IP configurations 7