HP StorageWorks Replication Solutions Manager Installation Guide (T3680-96016, July 2006)

The ﬁlesinthese directoriesweremodiﬁed using Storage Area Manager. Do not remove these

directories if you think you will use the host to link to p revious jobs and logs.

2. Back up the replication database using the Export feature.

For instructions, see HP StorageWorks Replication Solutions Manager a dministrator guide.

3. Remove the server software from the management server.

For instructions, see "Removing the server software"onpage19.

4. Install the new server software on the management server.

For instructions, see "Installing the ser ver software" on page 17.

5. Restore the replication database using the Import feature.

For instructions, see HP StorageWorks Replication Solutions Manager a dministrator guide.

Verifying the installation

To verify that the software was installed successfully, ensure that:

• The software icon

appears on the desktop.

• Thesoftwareis available from theStart menu (Start > Programs > Hewlett-Packard > HP

Replicati

on Solutions Manager).

• HP Replication Solutions Manager is listed in Add/Remove P rograms.

If you experience any issues, see "Troubleshooting" on page 25, and then repeat the installation.

If you require the product code for the replication manager (for example, to include the product code in

scripts that track installed applications), open Registry Editor and go to the following directory:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Uninstall

The produ

code is b6f613d678bfa387048dae940c9d2fe and is appended with eight hexadecimal

charact

ers. These characters are generated based on the directory in which the server software is

installed.

Removing the server soft ware

When removing the server software, consider the following:

• To prevent data loss, allow all replication jobs to run to completion, or disable scheduled jobs

before removing the software.

• Removing thesoftwareoveranetworkwithout remoteconnectionsoftwareisnot supported and

could

cause errors.

• You cannotuse theSMA software interface toremovethe software. Removethe software from the

SMA

using Windows Add/Remove P rograms only.

• Close all applications and windows on or open to the management server.

Use Windows Add/Remove Programs to remove the software. You can remove the server software

remotely (using remote connection soft ware) or locally. When removing the server soft ware remotely,

use Terminal Services to access the management ser ver and log in. The InstallShield Wizard indicates

if a

reboot is n e cessary after software removal.

HP StorageWorks Replication Solutions Manager installation guide