HP StorageWorks Replication Solutions Manager Command Line User Interface Reference (T3687-96029, August 2005)

suspend Suspends replication on all members in the m anaged set.

SET SYSTEM

Synopsis

set sys[tem] <system name>

{[refresh]

|[refresh_all]}

Description

The SET SYSTEM comma nd displays the properties of the storage array.

Switches

system name Speciﬁes the na m e of the array.

refresh Refreshes the data for the array. If the name is omitted, the selected array

will be refreshed.

refresh_all Refreshes all of the array data for the entire replication server.

SET VDISK

Synopsis

set vd[isk] <vdisk name>

[cache_m[ode]|cm={write_t[hrough]|wt|write_b[ack]|wb}] [remove_p[resentation]|rp=<host name>]

[refresh]

[{add_p[resentation]|ap={host name}}

|[lun=<lun number>]]

[[inst[ant_restore]|instrest|irestore=<disk name>]]

Description

Use th e SET VDISK command to mod ify virtual disk properties.

Switches

cache_mode Sets the virtual disk's write cache to write-through or write-back mode. See

Cache policies in the HP Replication Solutions Manager online help and user

guide for information on write cache mode.

vdisk name Speciﬁes the name of the virtual disk.

remove_presenta-

tion

Selects an EVA host n ame to which to unpresent your virtual dis k.

add_presentation Selects an EVA host name to which to present your virtual disks. This allows

those hosts access to virtual disk data. Presenting more than one host to a

volume enables possible write conﬂicts. EVA hosts are port lists and they may

consist of ports from one or more physical host arrays. Presenting to such an

EVA host enables possible write con ﬂicts.

lun A valid LUN number for this host. The default is auto select.

refresh Performs a manual refresh of the virtual disk properties prior to other

operations that may have been speciﬁed in this command.

CLUI commands