HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 111
15 Performance Control Base Monitor Function
Monitoring S/W Operation
[PCBM]
Performance Control Base Monitor function
Monitoring S/W
Monitoring Options operation
Enable 60sec
Enable 60 sec is selected as the parameter. The operation uses the following parameters, as
shown in Table 71.
Table 71 Parameters for Monitoring S/W Operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999).
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[PCBM],Monitoring S/W,Enable
60sec,,Normal end,
Seq.=xxxxx
Parameters Description
Enable XXsec Monitoring is enabled and the gathering interval is set as XX sec.
Disable Monitoring is disabled.