HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Remote Control Unit (RCU) Function120
Add RCU Operation
Example 1 (when CU Free is used)
Example 2 (when CU Free is not used)
[RCU]
Remote Control Unit function
Add RCU
Add Remote Control Unit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 78.
SSID The SSID.
MCU Port The port number of MCU.
RCU Port The port number of RCU.
Num. of Port Pairs The number of port pairs set.
Item Description
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add RCU,,Normal
end,Seq.=xxxxx
+{S/N,Path Gr. ID,Controller ID,Min. Path,MIH Time(s),Round Trip
Time(ms),Incident,FREEZE}={99999,
Default,4,08,015,001,only to RCU host,Disable}
++{MCU Port,RCU
Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add RCU,,Normal
end,Seq.=xxxxx
+{S/N,MCU,RCU,SSID,Controller ID,Min. Path,MIH Time(s),Round Trip
Time(ms),Incident,FREEZE}={99999,
0x00,0x3f,0x0004,4,08, 015,001,only to RCU host,Disable}
++{MCU Port,RCU
Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8