HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 165
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 115.
Table 115 Detailed Information for Change Pair Option Operation
Delete Consistency Group (CTG) Operation
[CAXP]
Continuous Access XP function
Delete CTG
Delete Consistency Group operation
0x00
This operation uses the following parameters, as shown in Table 116.
Item Description
P-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the primary volume where the pair
option is changed sequentially.
Fence Level The changed fence level (the condition that MCU rejects Write to the primary volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Error Level The error level changed (handling in case of trouble).
This value is output when the pair option of the asynchronous pair is changed only.
Group: Group (suspended by consistency group),
LU: LU (appropriate LU only is suspended)
Result The result of operation.
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end
xxxx: Part code
yyyyy: Error code
Num. of Pairs The number of changed pairs.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CAXP],Delete CTG,0x00,,Normal
end,Seq.=xxxxxx