HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

LUN Manager (LUNM) Function98
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 57.
Table 57 Detailed Information for SetCommandDev Operation
Set CommandDevSec Operation
[LUNM]
Logical Unit Number Manager function
Set CommandDevSec
Set CommandDevSec operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 58.
Item Description
CU:LDEV The CU and LDEV numbers of the logical volume where the command device setting is
changed.
CommandDev Indicates whether the command device setting is enabled or disabled.
Disable or Enable is output.
Num. of LDEVs The number of logical volumes where the command device setting is changed.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set
CommandDevSec,,Normal end,Seq.=xxxxx
+{CU:LDEV,CommandDevSec}=[{0xXX:0xXX,Disable},{0xXX:0xXX,Enable}],Num.of
LDEVs=2