HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Continuous Access XP Media

HP StorageWorks

XP24000 Audit Log User and Reference Guide

Part number: AE131-96003

First edition: June 2007

Summary of content (276 pages)

PAGE 1
HP StorageWorks XP24000 Audit Log User and Reference Guide Part number: AE131-96003 First edition: June 2007
PAGE 2
Legal and notice information © Copyright 2007 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
PAGE 3
Contents About this Guide ................................................................................ 17 Intended Audience .................................................................................................................... Related Documentation .............................................................................................................. Document Conventions ..............................................................................................................
PAGE 4
HP XP for Compatible Parallel Access Volumes Software (CPAV) - Add Alias Operation ..................... 57 HP XP for Compatible Parallel Access Volumes Software (CPAV) - Delete Alias Operation .................. 57 Data Retention Utility (DRU) - Attribute Operation .......................................................................... 58 Data Retention Utility (DRU) - Expiration-Lock Operation ................................................................. 59 FC - Set SCP Time Operation .............
PAGE 5
Install - Uninstall Operation ...................................................................................................... 108 Install - Update Config Operation ............................................................................................. 113 Install - Volume to Space Operation .......................................................................................... 114 Logical Device (LDEV) - Volume-Blockade Operation ..............................................................
PAGE 6
PORT - Change Port Operation ................................................................................................. 156 Optional Product (PP) KEY - PP Disable chk Operation ................................................................. 156 Optional Product (PP) KEY - PP Enable chk Operation .................................................................. 157 Optional Product (PP) KEY - PP Install chk Operation ....................................................................
PAGE 7
HP XP Continuous Access Software for Mainframe - Suspend Pair Operation .................................. 203 HP XP Continuous Access Journal Software - Journal-Option Operation .......................................... 204 HP XP Continuous Access Journal Software - Journal-Vol Operation ................................................ 205 HP XP Continuous Access Journal Software - Journal-Vol Operation ................................................
PAGE 8
V V V V Volume (VVOL) - Pool Initialize Operation ................................................................................ Volume (VVOL) - Pool Restore Operation ................................................................................. Volume (VVOL) - Pool SIM Comp Req Operation ...................................................................... Volume (VVOL) - Set Pool Operation .......................................................................................
PAGE 9
Figures 1..Syslog Main Window ............................................................................................. 24 2..Audit Log Information File ........................................................................................ 27 3..Syslog Information File ............................................................................................ 30 4..Items Described in Sample Audit Logs ....................................................................... 43 5..
PAGE 10
Tables 1..Document conventions ............................................................................................. 17 2..Audit Log File Components ...................................................................................... 24 3..Audit Log File Output .............................................................................................. 25 4..Items in Audit Log Information File ............................................................................. 27 5..
PAGE 11
33..Detailed Info: Add Host Group Operation ................................................................. 67 34..Detailed Info: Add LU Path Operation ....................................................................... 68 35..Detailed Info: Add WWN Operation ........................................................................ 68 36..Detailed Info: All Config Operation ........................................................................... 69 37..Detailed Info: Assist Config Operation ........
PAGE 12
69..Detailed Info: Set Battery Life Operation .................................................................... 96 70..Detailed Info: Set Channel Speed Operation .............................................................. 97 71..Detailed Info: Set Command Device (CommandDev) Operation .................................... 97 72..Detailed Info: Set Command Device Security (CommandDevSec) Operation ................... 98 73..Detailed Info: Set Fibre Address Operation .....................................
PAGE 13
105..Detailed Info: Delete LU Path Operation ................................................................... 125 106..Detailed Info: Delete WWN Operation ................................................................... 125 107..Detailed Info: Set Authentication Operation ............................................................. 126 108..Detailed Info: Set Channel Speed Operation ............................................................ 127 109..
PAGE 14
2..Parameters: Monitoring Switch (SW) Operation ........................................................ 155 143..Parameters: Monitoring Switch (SW) Operation ........................................................ 155 144..Detailed Info: Change Port Operation ..................................................................... 156 145..Detailed Info: PP Disable chk Operation .................................................................. 157 146..Detailed Info: PP Enable chk Operation ..............
PAGE 15
179..Detailed Info: Paircreate Operation ......................................................................... 187 180..Detailed Info: Pairresync Operation ......................................................................... 189 181..Detailed Info: Pairsplit-r Operation .......................................................................... 190 182..Detailed Info: Pairsplit-S Operation ......................................................................... 191 183..
PAGE 16
216..Detailed Info: Suspend-Pair Operation ..................................................................... 224 217..Detailed Info: System-Option Operation ................................................................... 225 218..Parameters: Change-CacheMode Operation ............................................................ 226 219..Detailed Info: Change-CacheMode Operation ......................................................... 227 220..Detailed Info: ChkPath-RestoreVol Operation ............
PAGE 17
About this Guide This document describes and provides instructions for using the audit log feature on the HP StorageWorks XP24000 Disk Array. The term storage system in this guide refers to an HP StorageWorks XP24000 Disk Array. Intended Audience This document assumes that: • The user is familiar with the operating system and web browser software on the system hosting the HP XP Remote Web Console software.
PAGE 18
Convention Element Monospace text • File and directory names • System output • Code • Commands, their arguments, and argument values Monospace, italic text • Code variables • Command variables Monospace, bold text Emphasized monospace text NOTE: Provides additional information.
PAGE 19
• Detailed questions Subscription Service HP recommends that you register your product at the Subscriber's Choice for Business website: http://www.hp.com/go/e-updates After registering, you will receive e-mail notification of product enhancements, new driver versions, firmware updates, and other product resources. HP Websites For additional information, see the following HP websites: • • • • http://www.hp.com http://www.hp.com/go/storage http://www.hp.com/service_locator http://www.hp.
PAGE 20
About this Guide
PAGE 21
1 Introduction This chapter introduces the audit logs created by the HP XP Remote Web Console or SVP (Service Processor) on the storage system. The SVP is a computer that is contained within the storage system. Users can access the audit logs that are output by the SVP, but the SVP itself is accessible only by HP personnel.
PAGE 22
NOTE: Audit Log Administrator Role needs to be set to Modify or View for the user account of that storage administrator. 2. Click the ( , , or ) button in the HP XP Remote Web Console main window. The window to specify the download destination appears: • • ) appears when the number of saved lines in the audit log information Audit:Normal button ( file is below the threshold.
PAGE 23
• If using a primary syslog server: • Select Enable in Output to Primary Server. • Enter the IP Address in Primary Server Setting. You do not have to enter the periods. • Enter the Port Number in Primary Server Setting. You can enter a number from 1 to 65,535. • If using a secondary syslog server: • Select Enable in Output toSecondary Server. • Enter the IP Address in Secondary Server Setting. You do not have to enter the periods. • Enter the Port Number in Secondary Server Setting.
PAGE 24
Figure 1 Syslog Main Window Audit Log File Description The following table describes the audit log file components: Table 2 Audit Log File Components Component Audit Log Information File Syslog Information File File Name audit.log syslog.log Downloaded File Name auditYYYYMMDD.tgz syslogYYYYMMDD.
PAGE 25
Component Audit Log Information File Syslog Information File Maximum File Size 122.5 MB 244.6 MB Threshold Once the audit log reaches its maximum capacity, the starting line of the oldest data begins to be overwritten with the starting line of the newest data (wrap around). When you reach 70% of this threshold, the yellow Audit:Warning button appears on the HP XP Remote Web Console Main window.
PAGE 26
Introduction
PAGE 27
2 Audit Log File Format This chapter describes the two types of audit log files and the items included in the files. • Audit Log Information File, page 27 • Syslog Information File, page 29 Audit Log Information File The audit log information file consists of both basic and detailed information about user logins, logouts and disk array configuration change operations. The detailed information includes an index representing each item and its setting's values.
PAGE 28
No. Item Explanation 3 Date Year, month and day the audit log was created (YYYYMMDD). 4 Time Hour, minute, second and millisecond the audit log was created (HH:MM:SSxxx). 5 Time zone The time difference between Universal Time (UT) and the local time appears as ±HH:MM (HH: hour, MM: minute). 6 Function name The abbreviation indicating the function or option which has been used to perform the setting operation is output. 7 Operation or event name The operation or option name.
PAGE 29
Symbol Definition + means the beginning of the index. The number of occurrences of + represents the number of indents. - means that the line continues from the previous line. = Connects an index and a setting value. [] When there is more than one setting value for one index, the setting values are enclosed by [ ], and separated by a comma (,). Example: CU:LDEV=[0x00:0x00,0x00:0x01,0x00:0x02] {} Details are enclosed by {}.
PAGE 30
Figure 3 Syslog Information File Table 6 Items in the Syslog File No. Item Description 1 Priority The priority according to the following formula, enclosed by brackets (< >): Priority = 8 × Facility + Severity Facility is 1 (fixed). The Severity depends on the type of log information: 3: Error. The operation has ended abnormally. 4: Warning. The operation has partly ended abnormally or was canceled during the operation. 6: Informational. The operation has ended normally.
PAGE 31
No. Item Description 5 Unified specification identification information The Unified specification identification character (CELFSS). 6 7 8 Message identification information 9 Date, time#2 The revision number of the Unified specification document (1.1). The serial number of the syslog header information. Message ID. Not displayed because it is not used. The date, time and the time difference between UTC (Coordinated Universal Time) in the format of YYYY-MM-DD-Thh:mm:ss.
PAGE 32
No. Item Description 16 Generated location information Not displayed because it is not used. 17 Related information The location identification name set by the user in the Syslog window. 18 FQDN. Not displayed because it is not used. 19 Redundant identification information. Not displayed because it is not used. 20 Agent information Not displayed because it is not used. 21 Detailed information Host sending the request. Not displayed because it is not used. 22 Port sending the request.
PAGE 33
No. Item Description • The event name is displayed instead of the operation when the function is [AuditLog]. See Table 3 and Table 7. 30 The same information contained in the basic information of the audit log information file is also displayed. For more information, see Figure 2.
PAGE 34
Audit Log File Format
PAGE 35
3 Understanding the Audit Log Information File This chapter is comprised of a table that illustrates the relationship between audit log functions, operations, and option names in the audit log information file. Functions are listed in alphabetical order. Each function and operation is documented in the following chapter. To see a sample audit log for an operation, click on its page number in the Sample Log column, or refer to the appropriate page in the following chapter.
PAGE 36
Function Name Operation Name Information Install 36 Page Option Name Delete Log 61 Service Processor (SVP) ORM Value 62 SIM Complete 63 SIM Reporting Option 64 Threshold Value 65 Add Host Group 66 Add LU Path 67 Add WWN 68 All Config 69 Assist Config 69 Backup Config 70 Change Host Group 70 Change WWN 71 DCR Prestaging 72 Define Config.
PAGE 37
Function Name LDEV LUNM Operation Name Page Set CommandDev 97 Set CommandDevSec 98 Set Fibre Address 98 Set Fibre Topology 99 Set Host Mode 100 Set IP Address 101 Set Security Switch 102 Set Speed Mode 102 Set Subsystem Time 103 System Option 104 System Tuning 106 Uninstall 108 Update Config 113 Volume to Space 114 Volume-Blockade 115 Volume-Format 115 Volume-Format(H) 116 Volume-Restore(N) 117 Add Host Group 118 Add LU Path 119 Add WWN 119 Auth Info (Host) 12
PAGE 38
Function Name Operation Name Page Set Fibre Topology 134 Set Host Mode 134 Set IP Address 136 Set iSNS 136 Set Security Switch 137 Set Speed Mode 138 Set TCP/IP Port 139 Make LUSE 139 Release LUSE 140 Blockade 140 Correction Copy 142 Drive Interrupt 142 Format 143 Format Stop 144 Recover 145 Replace 145 Restore 147 Restore Data 148 Size Change 149 Spare Disk 150 Switch SVP 150 Transfer Config 151 Type Change 151 Verify 152 Verify Stop 153 OND Release Cac
PAGE 39
Function Name Operation Name Page PP Enable chk 157 PP Install chk 157 PP Install File chk 158 PP Uninstall chk 159 SLPR PP Change 159 Add Path 160 Add RCU 161 Change RCU Option 163 Delete Path 164 Delete RCU 165 Change Reserve 166 Initialize 167 Option 167 Paircreate 168 Pairresync 169 Pairsplit 169 Pairsplit-E 170 Pairsplit-S 171 Add Pair 172 Change Reserve 173 CTG 174 Delete Pair 175 Initialize 175 Option 176 Resync Pair 177 Split Pair 178 Suspend Pa
PAGE 40
Function Name TC z/OS UR UR z/OS UVM 40 Operation Name Page Pairsplit-S 191 Start Pair 192 Add CTG 192 Add Pair 193 Change Async Option 195 Change CTG Option 195 Change Option 196 Change Pair Option 197 Clear SIM 198 Delete CTG 199 Delete Pair 199 Resume Pair 200 Script Operation 202 Start Pair 202 Suspend Pair 203 Journal-Option 204 Journal-Vol 205 Journal-Vol 206 Paircreate 207 Pairresync 208 Pairsplit-r 210 Pairsplit-S 211 Pair-Option 212 System-Optio
PAGE 41
Function Name Operation Name Page Delete-Vol(Force) 228 Delete-Vol(Normal) 229 Disconnect-Paths 229 Disconnect Volume 230 Inflow-Control 230 WwnTimer 231 Install CV 232 Make Volume 233 Set SSID 235 Volume Initialize 235 Volume to Space 236 Del Auto Plan Log 237 Del Migration Log 237 Set Migration Vol 238 Set Reserved Vol 239 VPM Set 239 HP XP Disk/Cache Partition VRM Attribute 241 Volume Retention Manager VTOC 242 End Shredding 242 Set Shredding 243 Suspend Shr
PAGE 42
Understanding the Audit Log Information File
PAGE 43
4 Sample Audit Logs This chapter includes a sample audit log for each function and operation that can be performed with the HP XP Remote Web Console. The individual items in each sample log are described, starting with function name. This includes function name, operation name, parameter, operation result, and sequence number, as shown in Figure 4.
PAGE 44
Audit Log - Create File ,,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[AuditLog],Create File,AuditLog,Warning,,, Seq.=xxxxx [Audit Log] Audit Log function Create File Create File event AuditLog This parameter indicates the audit log information file has been reproduced. Warning The operation has partly ended abnormally or was canceled during the operation. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Audit Log - Over MaxLine Event 14> Jan 4 06:25:18 SVP Storage: CELFSS,1.
PAGE 45
Over Threshold event Normal end The operation has ended normally. Audit Log - Set Syslog Server Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Audit Log],Set Syslog Server ,DetailFlg=Enable, Normal end,,,Seq.=xxxxx +DetailFlg=Enable +LocationInfo=USP001 +{ServerType,IPAddrVer,OutFlg,SrvAddr,SrvPortNum}=[{Primary,IPv4,Disable, 192.168.0.1,514}, {Secondary,-,Enable,192.168.10.
PAGE 46
Item Description ServerType The syslog server to which information is output. Not output when setting is not changed. Primary: Primary syslog server. Secondary: Secondary syslog server. IPAddrVer The version number of the internet protocol. If the setting is not changed, a hyphen (-) is displayed. IPv6: Internet Protocol Version 6 (not supported). IPv4: Internet Protocol Version 4 OutFlg Whether to transfer the syslog information to the syslog server. Enable: Transfer syslog information.
PAGE 47
Item Description Authority The authority of the user. A dash (-) appears when nothing is changed. Administrator (Modification authority of account administrator roll): Administrative right. User: users right SLPRNo The SLPR number of the user. A dash (-) appears when nothing is changed. 65535: Storage administrator. 1 to 31: Storage partition administrator WritePermission The write permission for each function appears as a hexadecimal character string.
PAGE 48
Bit Position in Binary (descending order) Function Name Permission of Storage Partition Administrator (*2) Remarks 125 Partition Definition - *1, *3 124-123 Not used - 122 SNMP Agent - *1, *3 121 License Key - *1, *3 120-114 Not used - 113 Configuration File Loader - 112-106 Not used - 105 Universal Volume Manager - 104-98 Not used - 97 Data Retention Utility Yes 96-77 Not used - 76 Not used - 75 Volume Retention Manager - *1, *3 74 Volume Security - *1, *3
PAGE 49
Bit Position in Binary (descending order) Function Name Permission of Storage Partition Administrator (*2) Remarks 25 Cache Residency Manager Yes *1, *3 24-21 Not used - 20 V_VOL - *1, *3 19 Pool - *1, *3 18 VLL Yes *1, *3 17 LUSE Yes *1, *3 16-12 Not used - 11 Authentication Yes *1, *3 10 Port Yes *1, *3 9 LUN Manager Yes *1, *3 8 Permission of Audit Log - *3 7 Permission of Account Yes *3 6-4 Not used - 3 Status - *4 2 Port Status - *4 1 Inform
PAGE 50
[Account] Account function Set Login Message Set Login Message operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 13 Detailed Info: Set Login Message Operation Item Description LoginMessageSentence Indicates the sentence of login Message displayed on the login window of HP XP Remote Web Console.
PAGE 51
Logout operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) BASE - Set System Info Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[BASE],Set System Info,,Normal end,,,Seq.=xxxxxx +{Name,Contact,Location}=[{xxxx,xxxx,xxxx}], Num. of SystemInfo=1 [Base] BASE function Set System Info Set System Information operation Normal end The operation has ended normally. Seq.
PAGE 52
DCR Prestaging operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Cache - Delete Cache Residency Manager for z/OS (M/F DCR) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[Cache],Delete M/F DCR,,Normal end,,,Seq.=xxxxx +{LDKC:CU:LDEV,Start CC-HH,End CC-HH}=[{0x00:0x00:0x00,XXXXXX-XX,XXXXXX-XX}, {0x00:0x00:0x00,XXXXXX-XX,XXXXXX-XX}],Num.
PAGE 53
Cache - Delete Open Cache Residency Manager (Open DCR) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cache],Delete Open DCR,,Normal end,,, Seq.=xxxxx +{LDKC:CU:LDEV,Start LBA,End LBA}=[{0x00:0x00:0x00,XXXXXXXXXXXXXXXX, XXXXXXXXXXXXXXXX}, {0x00:0x00:0x00,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],Num. of LDEVs=2 [Cache] Cache function Delete Open DCR Delete Open DCR operation Normal end The operation has ended normally. Seq.
PAGE 54
Set M/F DCR Set M/F DCR operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 55
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 18 Detailed Info: Set Open Cache Residency Manager (Open DCR) Operation Item Description LDKC:CU:LDEV The LDKC, CU and LDEV numbers of the logical volume (for an open system) where the setting information for Cache Residency cache is added or changed. Mode The setting mode of Cache Residency cache.
PAGE 56
Start is the selected parameter. This operation uses the following parameters, as shown in the following table. Table 19 Parameters: Configuration File Loader - LUNM Operation Parameter Description Start Start of the Configuration File Loader. End End of the Configuration File Loader. Normal end The operation has ended normally. Seq.
PAGE 57
HP XP for Compatible Parallel Access Volumes Software (CPAV) - Add Alias Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[CPAV],Add Alias,,Normal end,,,Seq.=xxxxx +LDKC=0x00,CU=0x00 ++{Alias LDEV,Base LDEV}=[{0xFD,0x00},{0xFE,0x00},{0xFF,0x01}],Num. of Alias LDEVs=3 +LDKC=0x00,CU=0x01 ++{Alias LDEV,Base LDEV}=[{0xFF,0x00}],Num. of Alias LDEVs=1 +Num. of Alias LDEVs=4 [CPAV] CPAV function Add Alias Add Alias operation Normal end The operation has ended normally. Seq.
PAGE 58
+LDKC=0x00,CU=0x01 ++{Alias LDEV,Base LDEV}=[{0xFF,0x00}],Num. of Alias LDEVs=1 +Num. of Alias LDEVs=4 [CPAV] HP XP for Compatible Parallel Access Volumes Software function Delete Alias Delete Alias operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 59
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 23 Detailed Info: Data Retention Utility (DRU) Attribute Operation Item Description LDKC:CU:LDEV The LDKC number, the CU number and the LDEV number of the logical volume where the attribute is set. Attribute The set attribute in hexadecimal. Each bit (0−7) of 1 byte corresponds to the setting item.
PAGE 60
Expiration-Lock Expiration-Lock operation SLPR#xx:Enable SLPR#xx: Enable is selected as the parameter. The operation uses the following parameters, as shown in the following table. Table 24 Parameters: Data Retention Utility (DRU) Expiration-Lock Operation Parameter Description SLPR#xx:Enable The expiration-lock setting is enabled for SLPR number xx. SLPR#xx:Disable The expiration-lock setting is disabled for SLPR number xx. SYSTEM:Enable The expiration-lock setting is enabled in the storage system.
PAGE 61
Item Description CU The CU number. SCP Time(s) The State Change Pending (SCP) delay time in seconds. Num. of CUs The number of CUs on which the SCP delay time is set. Information - Delete Log Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xx, 00:00,[Information],Delete Log,SIM,Normal end,,, Seq.=xxxxx [Information] Information Function Delete Log Delete Log operation SIM SIM is the selected parameter. This operation uses the following parameters, as shown in the following table.
PAGE 62
Information - ORM Value Operation Example 1 (changing the threshold) user-name,xx,YYYY/MM/DD,HH:MM:SS:xx, 00:00,[Information],ORM Value,Alter,Normal end,,, Seq.=xxxxx +Type=7days +{Read Err.(Unrecovered),Read Err.(Recovered),Seek Err.(Recovered),Seek Err. (Unrecovered), Not Ready,Other Errors}={15,1.00e-008,100,10,10,10} ++PDEV=[HDDR00-01,HDDR00-02,(snip)],Num. of PDEVs=1152 Example 2 (Error Reset) user-name,xx,YYYY/MM/DD,HH:MM:SS:xx, 00:00,[Information],ORM Value,Error Reset, Normal end,,, Seq.
PAGE 63
Item Description Read Err.(Unrecovered) The threshold of Read Error (Unrecovered). Read Err.(Recovered) The threshold of Read Error (Recovered). Seek Err.(Recovered) The threshold of Seek Error (Recovered). Seek Err.(Unrecovered) The threshold of Seek Error (Unrecovered). Not Ready The threshold of Not Ready. Other Errors The threshold of Other Errors. PDEV The mounting location of the PDEV (physical device) which is the target of Alter or error reset. Num.
PAGE 64
Information - SIM Reporting Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xx, 00:00,[Information],SIM Reporting Option,,Normal end,,, Seq.=xxxxx +Type=DKC SIM ++{Acute,Serious,Moderate,Service}={ON,ON,ON,ON} +Type=Cache SIM ++{Acute,Serious,Moderate,Service}={ON,ON,ON,ON} +Type=Media SIM ++{Acute,Serious,Moderate,Service}={ON,ON,ON,ON} +Type=Device SIM ++{Acute,Serious,Moderate,Service}={ON,ON,ON,ON} +Num.
PAGE 65
Information - Threshold Value Operation Example 1 user-name,xx,YYYY/MM/DD,HH:MM:SS:xx, 00:00,[Information],Threshold Value,Alter, Normal end,,,Seq.=xxxxx +Type=7days +{Mechanical error(Recovered,Unrecd.),Media error(Recovered,Unrecd.), Read/Write error(Recovered,Unrecd.),Drive I/F error(Recovered,Unrecd.), Controller hardware error(Recovered,Unrecd.),FC I/F error Port 0(Unrecd.), FC I/F error Port 1(Unrecd.),Prot 0 error(Unrecd.),Port 1 error(Unrecd.
PAGE 66
Item Description 7days: 7 days, Total: Every operating days Mechanical error (Recovered,Unrecd.) The threshold of Mechanical error. Media error (Recovered,Unrecd.) The threshold of Media error. Read/Write error (Recovered,Unrecd.) The threshold of Read/Write error. Drive I/F error (Recovered,Unrecd.) The threshold of Drive I/F error. Controller hardware error (Recovered,Unrecd.) The threshold of Controller hardware error. FC I/F error Port 0 (Unrecd.) The threshold of FC I/F error Port 0.
PAGE 67
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 33 Detailed Info: Add Host Group Operation Item Description Port The name of the port where the host group has been newly added. HostGrpID The host group number newly added. HostGrpName The name of the newly added host group. Mode The newly added host mode.
PAGE 68
Detailed information displays for this operation, as shown in the following table. Table 34 Detailed Info: Add LU Path Operation Item Description Port The name of the port where the host group is created. HostGrpID The host group number linked to the logical volume. LUN Indicates LUN of the logical volume linked to the host group. LDKC:CU:LDEV The LDKC, CU and LDEV numbers of the logical volume linked to the host group. Num. of Paths The number of LU paths set.
PAGE 69
Install - All Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],All Config,,Normal end,,,Seq.=xxxxx +{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx} [Install] Install function All Config All Config operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 70
Detailed information displays for this operation, as shown in the following table. Table 37 Detailed Info: Assist Config Operation Item Description New Ver. The new version number. Old Ver. The old version number. Install - Backup Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],Backup Config,,Normal end,,,Seq.=xxxxx +Ver.=xx-xx-xx/xx [Install] Install function Backup Config Backup Config operation Normal end The operation has ended normally. Seq.
PAGE 71
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 39 Detailed Info: Change Host Group Operation Item Description Port The name of the port where the host group is created. HostGrpID The host group number where the name or host modes have been changed. HostGrpName The name of the host group.
PAGE 72
Item Description Change WWN Indicates WWN of the host bus adapter after change. Change Nickname The nickname of the host bus adapter after change. Num. of WWNs The number of host bus adapters (WWN) where the settings have been changed. Install - Cache Residency Manager (DCR) Prestaging Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],DCR Prestaging,,Normal end,,, Seq.=xxxxx [Install] Install function DCR Prestaging DCR Prestaging operation Normal end The operation has ended normally.
PAGE 73
[Install] Install function Delete DKC WWN Delete DKC WWN operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 41 Detailed Info: Delete Disk Controller (DKC ) WWN Operation Item Description Port The port name where the host of WWN deleted from WWN list was connected. Delete WWN Indicates WWN deleted from WWN list.
PAGE 74
Item Description HostGrpID The host group number deleted or initialized. Num. of Host Groups The number of host groups deleted or initialized. Install - Delete LU Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Delete LU Path,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,LUN,LDKC:CU:LDEV}=[{XX,0xXXX,0xXXX,0xXX:0xXX:0xXX},{XX,0xXXX,0xXXX, 0xXX:0xXX:0xXX},{XX,0xXXX,0xXXX,0xXX:0xXX:0xXX}],Num.
PAGE 75
Install function Delete WWN Delete WWN operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 44 Detailed Info: Delete WWN Operation Item Description Port The name of the port where the host deleted from host group was connected. HostGrpID The host group number where the host is deleted.
PAGE 76
Detailed information displays for this operation, as shown in the following table. Table 45 Detailed Info: Install - Disk Unit (DKU) Emulation Operation Item Description Type The emulation type. LDEV(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers where the emulation type is changed. Num. of LDEVs The number of logical volumes where the emulation type is changed. Types The number of emulation types.
PAGE 77
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Format,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 in case of an external volume +PG=[V1-1],Num. of PGs=1 in case of a vertual volume +LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1 [Install] Install function Format Format operation Normal end The operation has ended normally. Seq.
PAGE 78
+PG=[V1-1],Num. of PGs=1 in case of a virtual volume +LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1 [Install] Install function Format Stop Format Stop operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 48 Detailed Info: Format Stop Operation Item Description PG The parity group number. Num.
PAGE 79
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx +{CHA,Kind}={CHA-1LU,16FS Fibre 8ch-4mp}, ++{Port,Fibre PCB Mode,Initiator/Target,Channel Speed,CU Number} =[{9J,Standard,Target,Auto,00:00-00:FE},{BJ,Standard,Target,Auto,00:00-00:FE}, -{DJ,Standard,Target,Auto,00:00-00:FE},{FJ,Standard,Target,Auto,00:00-00:FE}, {9K,Standard,Target,Auto,00:00-00:FE},{BK,Standard,Target,Auto,00:00-00:FE}, -{DK,Standard,Target,Auto,00:00-00:FE},{FK,Standard,Target,Auto,00:00-00:FE}], Num.
PAGE 80
Item Description Channel Speed The channel speed is indicated for open systems. 1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, Auto: Auto mode. CU Number Indicates the range of the CU number which the port belongs. Num of Ports The number of ports. HTP The HTP is indicated for FICON. LCP/RCP The LCP or RCP is indicated for ESCON. Emulation The emulation type is indicated for mainframe systems. Num. of Channel Adapters (CHA) The number of Channel Adapters (CHA).
PAGE 81
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 50 Detailed Info: Install Operation (Installing Additional Subsystems, ECC Groups or LDEVs) Item Description Disk Adapter (DKA) The Disk Adapter (DKA) mounting location. Transfer Rate The transfer rate of Disk Adapters (DKA). Num. of Disk Adapters (DKA) The number of Disk Adapters (DKA).
PAGE 82
Item Description Num. of SPAREs The number of spare drives. NOTE: Only the changed items will be output. The Detailed information for the recovery process will not be output when the installation process is executed before the process has completed. However, the setting of the recovery process will be output as the Detailed information for the process when the installation process is executed before the recovery process has not completed.
PAGE 83
Item Description DCR available size The capacity of Cache Residency. CLPR The CLPR number. Cache size The capacity of the cache memory allocated to CLPR. DCR size The capacity of Cache Residency allocated to CLPR. Extent Number The number of extents allocated to CLPR. Num. of CLPRs The number of CLPR. SM The mounting location of the shared memory. Slot The slot position of the shared memory module. Size The capacity of the shared memory. Num. of SMMs The number of shared memory modules.
PAGE 84
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 52 Detailed Info: Install Operation (Installing Additional Shared Memory) Item Description SM The mounting location of the PCB for shared memory. Slot The slot position of the shared memory module. Size The capacity of the cache memory module. Num of SMMs The number of shared memory modules. PP Flag The option flags.
PAGE 85
Detailed Information Detailed information displays for this operation, as shown in the following table. Table 53 Detailed Info: Install Operation (Installing Additional Power Supply) Item Description Redundant Power Supply The installed additional cluster power supply. Num. of Redundant Power Supplies The number of additional cluster power supplies. Example 6 (installing additional battery) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Install,,Normal end,,,Seq.
PAGE 86
[Install] Install Function Install CV Install CV operation No parameter or Non Format No parameter is selected. This operation uses the following parameters, as shown in the following table. Table 55 Parameters: Install CV Operation Parameter Description No parameter Formatted Install CV. Non Format Unformatted Install CV. Normal end The operation has ended normally. Seq.
PAGE 87
Install - Machine Install Date Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Machine Install Date,,Normal end,,, Seq.=xxxxx +Date=YYYY/MM/DD HH:mm [Install] Install function Machine Install Date Machine Install Date operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 88
Detailed information displays for this operation, as shown in the following table. Table 58 Detailed Info: Make LUSE Operation Item Description LUSE(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of several LDEVs combined into a LUSE volume. The number indicated at the beginning represents the LDKC, CU and LDEV numbers of the top LDEV. Num. of LUSEs The number of LUSE volumes configured. Install - Make Vol./Vol. Init Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Make Vol./Vol.
PAGE 89
Item Description LDKC:CU:LDEV The LDKC, CU and LDEV numbers. Emulation The emulation type. Size The capacity of CV. Unit The unit of the capacity of CV. System Disk The setting status of system disk. Disable or Enable is output. SSID The subsystem ID. Num. of LDEVs The number of LDEVs. Install - Micro Program Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],Micro Program,,Normal end,,,Seq.=xxxxx +Micro Media=Floppy Disk +Exchange How=Online +Open Port Mode=Stop SCSI +Reboot Grp.
PAGE 90
Item Description Open Port Mode The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output when the PCB of the open system is not installed, or MP reboot is not executed. Reboot Grp. The reboot group (By1/2, By1/4, or By One). However, it is not output when microprogram is changed offline, or MP reboot is not executed. Micro Kind The kind of microprogram.
PAGE 91
Install - Cache Residency Manager for z/OS (M/F DCR) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],M/F DCR,,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=0x00:0x00:0x00 ++{Define,Mode,Prestaging,Start CC-HH,End CC-HH}=[{Set,Bind,No,00-00,00-10}, {Set,Priority,Yes,1000-00,1009-14}],{Delete,-,-,1000-00,1009-14}], Num. of DCR Settings=3 [Install] Install function M/F DCR M/F DCR operation Normal end The operation has ended normally. Seq.
PAGE 92
Install - New Installation Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],New Installation,,Normal end,,,Seq.=xxxxx +Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG}, Num. of Kind=7 [Install] Install function New Installation New Installation operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 93
Detailed information displays for this operation, as shown in the following table. Table 65 Detailed Info: Cache Residency Manager Open DCR Operation Item Description LDKC:CU:LDEV The LDKC number, the CU number and the LDEV number of the logical volume (for an open system) where Cache Residency is set. Define The setting status of Cache Residency. Set: set, Delete: cancel Mode The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.
PAGE 94
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 66 Detailed Info: Patch Edit Operation Item Description Block The block number. File The file information. Old: old data, New: new data. Entry The entry number. Ctl. The control information. 00: Invalid, 20: End in sector, 40: End of patch, 80: Valid Address The address. Old Data The old data.
PAGE 95
Detailed information displays for this operation, as shown in the following table. Table 67 Detailed Info: Release LUSE Operation Item Description LUSE(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of several LDEVs that were combined into the released LUSE volume. The number indicated at the beginning represents the LDKC, CU and LDEV numbers of the top LDEV. Num. of LUSEs The number of LUSE volumes released. Install - Restore Config.
PAGE 96
Detailed information displays for this operation, as shown in the following table. Table 68 Detailed Info: Restore Config. Operation (Example 2) Item Description New Ver. The new version number. Old Ver. The old version number. Install - Set Battery Life Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Battery Life,,Normal end,,, Seq.
PAGE 97
Install function Set Channel Speed Set Channel Speed operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 70 Detailed Info: Set Channel Speed Operation Item Description Port The name of the port that the channel speed is set. Speed(Gbps) The channel speed set. 1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, Auto: Auto mode. Num.
PAGE 98
Item Description CommandDev Indicates whether the command device setting is enabled or disabled. Disable or Enable is output. Num. of LDEVs The number of logical volumes where the command device is set. Install - Set Command Device Security (CommandDevSec) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set CommandDevSec,,Normal end,,, Seq.=xxxxx +{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}], Num.
PAGE 99
Install function Set Fibre Address Set Fibre Address operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 73 Detailed Info: Set Fibre Address Operation Item Description Port The name of the port that the fibre address has been set. Fibre Addr. The address of Fibre Channel port after change using a number from 1 to 126.
PAGE 100
Item Description Fabric Indicates whether the Fabric switch is enabled or disabled. Enable: Enabled, Disable: Disabled Connection The connecting mode of the Fabric switch selected. FC-AL: FC-AL is selected, P-to-P: P-to-P is selected Num. of Ports The number of ports where the topology of Fibre Channel is set. Install - Set Host Mode Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Host Mode,,Normal end,,,Seq.
PAGE 101
Install - Set IP Address Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end,,, Seq.=xxxxx +{IPAdd,Subnet,Use Duplex,SVP Kind,M-SVP IPAdd,M-SVP Sunbet, S-SVP IPAdd,S-SVP Subnet}= {(123.456.789.123),(255.255.255.255),Valid,Master SVP,(111.222.333.444), (255.255.255.255), (555.666.777.888),(255.255.255.255)} [Install] Install function Set IP Address Set IP Address operation SVP&DKC SVP&DKC is the selected parameter.
PAGE 102
Item Description M-SVP Subnet The subnet mask of Master SVP. S-SVP IP Add The IP address of Standby SVP. S-SVP Subnet The subnet mask of Standby SVP. Install - Set Security Switch Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Security Switch,,Normal end,,, Seq.=xxxxx +{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2 [Install] Install function Set Security Switch Set Security Switch operation Normal end The operation has ended normally. Seq.
PAGE 103
Install function Set Speed Mode Set Speed Mode operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 79 Detailed Info: Set Speed Mode Operation Item Description Channel Adapter (CHA) The Channel Adapter (CHA) name (name of channel adapter). Port Block The port block. Port blocks A and B are output.
PAGE 104
TOD Change is the selected parameter for example 1, and Synchro. Infor is the selected parameter for example 2. This operation uses the following parameters, as shown in the following table. Table 80 Parameters: Set Subsystem Time Operation Parameter Description TOD Change The date and the time. Synchro. Infor. The setting of time correction function. Normal end The operation has ended normally. Seq.
PAGE 105
+{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1 +{LPR,Command Control}=[{System,10}],Num. of LPRs=1 +{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1 +Debug Mode=Set [Install] Install function System Option System Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 106
Item Description Power Supply Type The type of AC-BOX. Disk Unit (DKU) The Disk Unit (DKU) mounting location. AC-BOX The type of AC-BOX. Num. of AC-BOXs The number of AC-BOX. LDKC:CU: LDEV The LDKC number, the CU number and LDEV number. Destage Indicates the setting status of Destage. ON: Execute write through operation (report the completion of the writing to the host after the writing to the disk drive has completed).
PAGE 107
+DDUMP=ON +Power Supply Type=3-phase AC Box(40A) +{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box(50A)}],Num. of AC-BOXs=1 +{Port,CU Number,Emulation}=[{1E,-,I-2107},{3E,00:10-00:1F,I-2107},{5E,-,I-2107}, {7E,-,I-2107}],Num. of Ports=4 +{DKA,Transfer Rate}=[{DKA-1AL,4},{DKA-1BL,4},{DKA-2ML,4},{DKA-2NL,4}],Num. of DKAs=4 +{LDKC:CU,LDEV,SSID}=[{0x00:0x00,0x00-0xff,0x0005}],Num. of SSIDs=1 [Install] Install function System Tuning System tuning operation Normal end The operation has ended normally. Seq.
PAGE 108
Item Description DKA The Disk Adapter (DKA) mounting location. Transfer Rate The Disk Adapter (DKA) transfer rate. Num.of DKAs The number of Disk Adapters (DKA). LDKC:CU The LDKC number and the CU number. LDEV The LDEV number. SSID The subsystem ID. Num of SSIDs The number of subsystem IDs. Install - Uninstall Operation Example 1 (uninstalling a channel adapter (CHA)) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.
PAGE 109
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +DKA=[DKA-1AL,DKA-1BL,DKA-2ML,DKA-2NL],Num. of DKAs=4 +DKU=[DKU-R1],Num. of DKUs=1 +FSW=[FSWR10-L,FSWR10-U,FSWR11-L,FSWR11-U,FSWR12-L,FSWR12-U,FSWR13-L,FSWR13-U, FSWR18-L,FSWR18-U,FSWR19-L,FSWR19-U,FSWR1A-L,FSWR1A-U,FSWR1B-L,FSWR1B-U], Num. of FSWs=16 +PG=[1-7,3-1],Num. of PGs=2 +{B4,SPARE}=[{1,1},{3,1}],Num.
PAGE 110
NOTE: Only the changed items will be output. The Detailed information for the recovery process will not be output when the uninstallation process is executed before the process has completed. However, the setting of the recovery process will be output as the Detailed information for the process when the uninstallation process is executed before the recovery process has not completed.
PAGE 111
Item Description DCR size The capacity of Cache Residency allocated to CLPR. Extent Number The number of extents allocated to CLPR. Num. of CLPRs The number of CLPR. SM The mounting location of the shared memory. Slot The slot position of the shared memory module. Size The capacity of the shared memory module. Num. of SMMs The number of shared memory modules. Battery The mounting location of the battery. Define Indicates the installation or the uninstallation of the battery.
PAGE 112
Detailed information displays for this operation, as shown in the following table. Table 87 Detailed Info: Uninstall Operation (Uninstalling a Shared Memory Module) Item Description SM The mounting location of the PCB for shared memory. Slot The slot position of the shared memory module. Size The capacity of the cache memory module. Num of SMMs The number of shared memory modules. PP Flag The flags of the options. Num of PP Flags The number of the flags of the options.
PAGE 113
Detailed information displays for this operation, as shown in the following table. Table 88 Detailed Info: Uninstall Operation (Uninstalling a Power Supply) Item Description Redundant Power Supply The uninstalled additional cluster power supply. Num. of Redundant Power Supplies The number of additional cluster power supplies. Example 6 (uninstalling a battery) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.
PAGE 114
Update Config Update Config operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 90 Detailed Info: Update Config Operation Item Description New Ver. The new version number. Old Ver. The old version number.
PAGE 115
Logical Device (LDEV) - Volume-Blockade Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LDEV],Volume-Blockade,,Normal end,,, Seq.=xxxxx +LDKC:CU:LDEV=[0x00:0x00:0x01,0x00:0x00:0x02,0x00:0x00:0x03,0x00:0x00:0x04, 0x00:0x00:0x05, 0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A], [LDEV] Logical Device function Volume-Blockade Volume-Blockade operation Normal end The operation has ended normally. Seq.
PAGE 116
0x00:0x00:0x06,0x00:0x00:0x07,0x00:0x00:0x08,0x00:0x00:0x09,0x00:0x00:0x0A], Num. of LDEVs=XXX [LDEV] Logical Device function Volume-Format Volume-Format operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 117
Volume-Format(H) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 94 Detailed Info: Volume-Format(H) Operation Item Description LDKC:CU:LDEV The LDKC number, the CU number and LDEV number. Num. of LDEVs The number of LDEVs being set.
PAGE 118
Detailed information displays for this operation, as shown in the following table. Table 95 Detailed Info: Volume Restore(N) Operation Item Description LDKC:CU:LDEV The LDKC number, the CU number and LDEV number. Num. of LDEVs The number of LDEVs being set. NOTE: The status does not change immediately after you execute an LDEV operation command. As a result, errors may occur after you execute the command.
PAGE 119
LUN Manager (LUNM) - Add Logical Unit (LU) Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Add LU Path,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,LUN,LDKC:CU:LDEV}=[{XX,0xXXX,XX,0xXX:0xXX:0xXX},{XX,0xXXX,XX, 0xXX:0xXX: 0xXX},{XX,0xXXX,XX,0xXX:0xXX:0xXX}],Num. of Paths=3 [LUNM] LUN Manager function Add LU Path Add Logical Unit operation Normal end The operation has ended normally. Seq.
PAGE 120
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 98 Detailed Info: Add WWN Operation Item Description Port The name of the port where the host group is created. HostGrpID The host group number where the host is registered. WWN Indicates WWN of the host bus adapter for the host registered in the host group.
PAGE 121
Item Description Add: add user authentication information, Change: change user authentication information, Delete: delete user authentication information UserName The user name where user authentication information has been set. The user name before change is indicated when Kind is set to Change. Change UserName The user name after change is indicated when Kind is set to Change. A hyphen (-) is indicated when Kind is set to Add or delete.
PAGE 122
LUN Manager (LUNM) - Change Host Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Change Host Group,,Normal end,,, Seq.=xxxxx +{Port,HostGrpID,HostGrpName}=[{XX,XXX,XXXXXXXXXXXXXXXX},{XX,XXX,XXXXXXXXXXXXXXXX}], Num. of Host Groups=2 [LUNM] LUN Manager function Change Host Group Change Host Group operation Normal end The operation has ended normally. Seq.
PAGE 123
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 102 Detailed Info: Change WWN Operation Item Description Port The name of the port where the host is connected. HostGrpID The host group number on which the host with WWN or nickname of the host bus adapter being changed is registered. WWN Indicates WWN of the host bus adapter before change. WWN is represented in hexadecimal.
PAGE 124
Item Description Num. of WWNs The number of WWNs deleted. LUN Manager (LUNM) - Delete Host Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Delete Host Group,,Normal end,,, Seq.=xxxxx +{Port,HostGrpID}=[{XX,XXX},{XX,XXX}],Num.of Host Groups=2 [LUNM] LUN Manager function Delete Host Group Delete Host Group operation Normal end The operation has ended normally. Seq.
PAGE 125
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 105 Detailed Info: Delete LU Path Operation Item Description Port The name of the port where the host group is created. HostGrpID The host group number where the LU path is deleted. LUN Indicates LUN where the LU path assignment is cancelled. Num. of Paths The number of LU paths deleted.
PAGE 126
LUN Manager (LUNM) - Set Authentication Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Authentication,,Normal end,,, Seq.=xxxxx +{Port,HostGrpID,Authentication}=[{1E,0x01,Enable},{3E,0x01,Disable}], Num. of Authentication=2 [LUNM] LUN Manager function Set Authentication Set Authentication operation Normal end The operation has ended normally. Seq.
PAGE 127
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 108 Detailed Info: Set Channel Speed Operation Item Description Port The name of the port that the host speed (data transfer speed) is set. Speed(Gbps) The host speed set. The unit is Gbps (Gigabits per second). When Auto is set for the host speed, Auto is output. Num.
PAGE 128
LUN Manager (LUNM) - Set Command Device Security (CommandDev Sec) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set CommandDevSec,,Normal end,,, Seq.=xxxxx +{LDKC:CU:LDEV,CommandDevSec}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}], Num.of LDEVs=2 [LUNM] LUN Manager function Set CommandDevSec Set CommandDevSec operation Normal end The operation has ended normally. Seq.
PAGE 129
Set FCSP Host Set FCSP Host operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 111 Detailed Info: Set Fibre-Channel Security Protocol (FCSP) Host Operation Item Description Port The name of the port which includes the host group where user name has been set.
PAGE 130
Detailed information displays for this operation, as shown in the following table. Table 112 Detailed Info: Set Fibre-Channel Security Protocol (FCSP) Port Info Operation Item Description Port The name of the port where authentication parameter has been set. Auth_TOV The time to execute authentication after the failure of port authentication. The unit is second. Reject Time The period of time to reject authentication when port authentication have failed. The unit is minute.
PAGE 131
Item Description bi-directional: bi-directional authentication, unidirectional: unidirectional authentication UserName The user name of the port. Num. of Ports The number of ports where authentication parameter has been set. LUN Manager (LUNM) - Set Fibre-Channel Security Protocol (FCSP) Target Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set FCSP Target,,Normal end,,, Seq.
PAGE 132
LUN Manager (LUNM) - Set Fibre Address Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Fibre Address,,Normal end,,,Seq.=xxxxx +{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2 [LUNM] LUN Manager function Set Fibre Address Set Fibre Address operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 133
Value Add.* Value Add.* Value Add.* Value Add.
PAGE 134
LUN Manager (LUNM) - Set Fibre Topology Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[LUNM],Set Fibre Topology,,Normal end,,, Seq.=xxxxx +{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P}, {XX,Disable,P-to-P}], Num. of Ports=4 [LUMN] LUN Manager function Set Fibre Topology Set Fibre Topology operation Normal end The operation has ended normally. Seq.
PAGE 135
Set Host Mode operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 118 Detailed Info: Set Host Mode Operation Item Description Port The name of the port where the host group is created. HostGrpID The host group number. Mode The host mode set.
PAGE 136
LUN Manager (LUNM) - Set IP Address Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set IP Address,,Normal end,,,Seq.=xxxxx +{Port,IPVersion,IPAddr,SubNetMask,GateWayAddr,DNSAddr}=[{1A,IPv4,(192.168.11.10), (255.255.255.0),(192.168.11.245),(192.168.250.100)}, -{3A,IPv4,(192.168.11.11),(255.255.255.0),(192.168.11.245),(192.168.250.100)}, {1B,IPv4,(192.168.100.100),(255.255.255.0),(192.168.100.245),(192.168.250.100)}, -{3B,IPv4,(192.168.254.128),(255.255.255.128),(192.168.254.245),(192.168.250.
PAGE 137
LUN Manager function Set iSNS Set iSNS operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 121 Detailed Info: Set iSNS Operation Item Description PortID The name of the port where the iSNS server address has been set. iSNSPort The iSNS server port number set. iSNSAddr The iSNS server address set. Num.
PAGE 138
Item Description Switch Indicates whether the LUN security setting is enabled or disabled. Disable or Enable is output. Num. of Ports The number of ports where the LUN security setting is changed. LUN Manager (LUNM) - Set Speed Mode Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Speed Mode,,Normal end,,, Seq.=xxxxxx +CHA=CHA-1EL ++{Port Block,Mode}=[{A,Standard},{B,High Speed/MIX}],Num. of Blocks=2 +Num.
PAGE 139
LUN Manager (LUNM) - Set TCP/IP Port Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set TCP/IP Port,,Normal end,,, Seq.=xxxxx {Port,PortNumber}=[{1A,2054},{3A,2055},{1B,4010},{3B,4011}],Num. of Ports=4 [LUNM] LUN Manager function Set TCP/IP Port Set TCP/IP Port operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 140
Detailed information displays for this operation, as shown in the following table. Table 125 Detailed Info: Make LUSE Operation Item Description LUSE(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of several LDEVs combined into a LUSE volume. The number indicated at the beginning represents the LDKC, CU and LDEV numbers of the top LDEV. Num. of LUSEs The number of LUSE volumes configured.
PAGE 141
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Blockade,,Normal end,,, Seq.=xxxxx +PCB=[CHA-1P],Num. of PCBs=1+ PDEV=HDD00-01 Example 3 (blocking an LDEV) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Blockade,,Normal end,,, Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 in case of an external volume +PG=[V1-1],Num. of PGs=1 in case of a virtual volume +LDEV=[0x00:0x03:0x2f],Num.
PAGE 142
Maintenance - Correction Copy Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Correction Copy,,Normal end, Seq.=xxxxx +PDEV=HDD00-01 [ Maintenance ] Maintenance function Correction Copy Correction Copy operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 143
Detailed information displays for this operation, as shown in the following table. Table 129 Detailed Info: Drive Interrupt Operation Item Description PDEV The mounting location of the PDEV (physical device). Maintenance - Format Operation NOTE: This log information indicates the completion of Format operation and does not indicate the completion of Format process. user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Format,,Normal end,,, Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num.
PAGE 144
NOTE: The status does not change immediately after you execute an LDEV operation command. As a result, errors may occur after you execute the command. Maintenance - Format Stop Operation NOTE: This log information is output when the format process is suspended. user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Format Stop,,Normal end,,, Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 in case of an external volume +PG=[V1-1],Num.
PAGE 145
Maintenance - Recover Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Recover,,Normal end,,, Seq.=xxxxx +Location=Cluster-1 [Maintenance] Maintenance function Recover Recover operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 146
+PCB=[BASE-1C],Num. of PCBs=1 +PCB=[MIX-1A],Num. of PCBs=1 +Failed=[CHA-1F],Num. of PCBs=1 Example 4 (replacing a PDEV (physical device)) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance], Replace,,Normal end,,,Seq.=xxxxx +PDEV=HDD00-01 +Copy=Restore Data +Diagnosis=Skip,Micro Program=Skip Example 5 ( Easy-replace of PDEV (physical device)) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance], Replace,Easy-Replace,Normal end, Seq.=xxxxx +PDEV={HDDR03-01},Num.
PAGE 147
Item Description PCB The mounting location of the PCB, (Channel Adapter (CHA), Disk Adapter (DKA), cache memory, CM, SM, cache switch, MIX or BASE) to be replaced. Failed When replacing multiple PCBs and some of the PCBs to be replaced had failures, the mounting locations of the failed PCBs are indicated. In such case, Warning is output as the result of the process. NOTE: This information is not output when there are no failed PCBs. Num. of PCBs The number of PCBs to be replaced.
PAGE 148
Restore Restore operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 134 Detailed Info: Restore Operation Item Description PCB The mounting location of the PCB (Channel Adapter (CHA), Disk Adapter (DKA), cache memory (CM), shared memory (SM), cache switch (CSW), MIX or BASE) to be restored.
PAGE 149
Detailed information displays for this operation, as shown in the following table. Table 135 Detailed Info: Drive Interrupt Operation Item Description PDEV The mounting location of the PDEV. Maintenance - Size Change Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Size Change,,Normal end,,, Seq.=xxxxx +PCB=[CACHE-2CB],Num. of PCBs=1 +SIZE=4096 +{Battery,Define}=[{BATTERY-12/BATTERY-22,Install}],Num.
PAGE 150
Maintenance - Spare Disk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Spare Disk,,Normal end,,, Seq.=xxxxx +PDEV=HDD00-01 [Maintenance] Maintenance function Spare Disk Spare Disk operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 151
Maintenance - Transfer Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Transfer Config,,Normal end, Seq.=xxxxx [ Maintenance ] Maintenance function Transfer Config Transfer Config operation Normal end The operation has ended normally. Seq.
PAGE 152
Detailed information displays for this operation, as shown in the following table. Table 138 Detailed Info: Type Change Operation Item Description SFP The port which Small Form-Factor Pluggable (SFP)s are inserted.. Type The type of the Small Form-Factor Pluggable (SFP) or the PCB. Short Wave: Short wave, Long Wave: Long wave Num of SFPs The number of inserted Small Form-Factor Pluggable (SFP)s. PCB The mounting location of the PCB to be replaced. Num. of PCBs The number of PCBs to be replaced.
PAGE 153
Maintenance - Verify Stop Operation NOTE: This log information is output when the format process is suspended. user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Maintenance],Verify Stop,,Normal end,,, Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1 [Maintenance] Maintenance function Verify Stop Verify Stop operation Normal end The operation has ended normally. Seq.
PAGE 154
{24,4096},{25,4096},{26,4096},{27,4096},{28,4096},{29,4096},{30,4096}, -{31,4096}],Num. of CLPRs=xx [OND] On-Demand (OND) function Release Cache/CLPR Release Cache/Cache Logical Partition (CLPR) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 155
Enable 60 sec is the selected parameter. The operation uses the following parameters, as shown in the following table. Table 142 Parameters: Monitoring Switch (SW) Operation Parameter Description Enable XXsec Monitoring is enabled and the gathering interval is set as XX sec. Disable Monitoring is disabled. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295).
PAGE 156
PORT - Change Port Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PORT],Change Port,,Normal end,,,Seq.=xxxxx +Attribute=RCU Target ++Port=[1E,3E,5E,7E], Num.of Ports=4 [PORT] PORT function Change Port Change Port operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 157
Detailed Information Detailed information displays for this operation, as shown in the following table. Table 145 Detailed Info: PP Disable chk Operation Item Description P.P. Name The name of the disabled option. Result The result of disabled check. Optional Product (PP) KEY - PP Enable chk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PP KEY],PP Enable chk,,Normal end,,, Seq.=xxxxx +{P.P.Name,Result}=[{JAVA API,Normal end}],Num.
PAGE 158
PP Install chk PP Install check operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 147 Detailed Info: PP Install chk Operation Item Description Key Code The key code used for installation. P.P. Name The name of the installed option. Result The result of installation.
PAGE 159
Item Description Result The result of file check in the installation. Num. of PPs The number of optional products installed. Option (PP) KEY - PP Uninstall chk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PP KEY], PP Uninstall chk,,Normal end,,, Seq.=xxxxx +P.P. Name,Result}=[{JAVA API,Normal end}],Num. of PPs=1 [PP KEY] Optional License Key function PP Uninstall chk PP Uninstall check operation Normal end The operation has ended normally. Seq.
PAGE 160
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 150 Detailed Info: SLPR PP Change Operation Item Description P.P. Name The name of the installed option. SLPR# The SLPR number of the SLPR where the option is installed. License Capa(GB) The licensed capacity of the installed option. The unit is GB (gigabyte). Num. of PPs The number of installed optional products.
PAGE 161
Detailed information displays for this operation, as shown in the following table. Table 151 Detailed Info: Add Path Operation Item Description S/N Indicates a serial number of the device. LDKC The LDKC number of the paired LDKC. Path Gr. ID The path group ID. When the path group ID is default setting, Default is output. Controller ID The controller ID. SSID The SSID. MCU Port The port number of MCU. RCU Port The port number of RCU. Num. of Port Pairs The number of port pairs set.
PAGE 162
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 152 Detailed Info: Add RCU Operation Item Description S/N Indicates a serial number of the registered RCU device. MCU LDKC The LDKC number of the connected LDKC. RCU LDKC The LDKC number of the paired LDKC. Path Gr. ID The path group ID of the registered RCU.
PAGE 163
Remote Control Unit (RCU) - Change RCU Option Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Change RCU Option,,Normal end,,, Seq.=xxxxx +{S/N,LDKC,Path Gr. ID,Controller ID,Min. Path,MIH Time(s), Round Trip Time(ms), Incident, FREEZE}={99999,0x00,Default,4,08,015,001,only to RCU host,Disable} Example 2 (CU Free is not used) user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Change RCU Option,,Normal end,,, Seq.=xxxxx +{S/N,LDKC,SSID,Controller ID,Min.
PAGE 164
Item Description Round Trip Time(ms) The round-trip response time (delay time for round-trip remote I/O) after change. The unit is in milliseconds. This value is output when HP XP Continuous Access Software or HP XP Continuous Access Software for Mainframeis used. Incident The incident of RCU after change. This value is output only when HP XP Continuous Access Software for Mainframeis used. “only to RCU host” or “to any host” is output.
PAGE 165
Detailed information displays for this operation, as shown in the following table. Table 154 Detailed Info: Delete Path Operation Item Description S/N The serial number of the device of RCU where the path has been deleted. LDKC The LDKC number of the paired LDKC. Path Gr. ID The path group ID of the path deleted. When the path group is a default setting, Default is output. Controller ID The controller ID of the RCU where the path has been deleted. SSID Indicates SSID.
PAGE 166
Detailed information displays for this operation, as shown in the following table. Table 155 Detailed Info: Delete RCU Operation Item Description S/N The serial number of the device of RCU deleted. LDKC The LDKC number of the paired LDKC. Path Gr. ID The path group ID of the RCU deleted. When the path group ID is a default setting, Default is output. Controller ID The controller ID of the RCU deleted. SSID The SSID of the RCU deleted.
PAGE 167
Item Description Num. of Vols The number of volumes where the reserve attribute is set or cancelled. HP XP Business Copy Software - Initialize Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI],Initialize,,Normal end,,,Seq.=xxxxx [SI] HP XP Business Copy Software function Initialize Initialize operation Normal end The operation has ended normally. Seq.
PAGE 168
Item Description HOST I/O Performance Indicates whether the host I/O option is enabled or disabled. Reserve X Reserved items. X is a number from 03 to 32. Enable: Option is enabled, Disable: Option is disabled. HP XP Business Copy Software - Paircreate Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00, [SI],Pair Create,,Normal end,,,Seq.
PAGE 169
HP XP Business Copy Software - Pairresync Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI],Pairresync,,Normal end,,,Seq.=xxxxx +Copy pace=Faster,Resync Type=Normal Copy ++{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD, Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Error(xxxx-yyyy)}],Num. of Pairs=2 [SI] HP XP Business Copy Software function Pairresync Pairresync operation Normal end The operation has ended normally. Seq.
PAGE 170
0xDD,0, Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,1,Error(xxxx-yyyy)}],Num. of Pairs = 2 [SI] HP XP Business Copy Software function Pairsplit Pairsplit operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 160 Detailed Info: Pairsplit Operation Item Description Copy Pace The set copy speed.
PAGE 171
Pairsplit-E Pairsplit-E operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 161 Detailed Info: Pairsplit-E Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the primary volume in the suspended pair.
PAGE 172
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 162 Detailed Info: Pairsplit-S Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the primary volume in the deleted pair. S-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the secondary volume in the deleted pair. Result The result of operation.
PAGE 173
Detailed information displays for this operation, as shown in the following table. Table 163 Detailed Info: Add Pair Operation Item Description Copy Pace The set copy speed. Faster: High speed, Medium: Medium speed, Slower: Low speed S-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the source volume in the created pair. T-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the target volume in the created pair. Result The result of operation.
PAGE 174
Item Description Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Vols The number of volumes that the reserve attribute is set or cancelled. HP XP Business Copy Software for Mainframe - Consistency Group (CTG) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],CTG,,Normal end,,,Seq.=xxxxx +{CTG,Command,Result}=[{0x00,,Normal end},{0x01,,Error(xxxx,yyyy)}],Num.
PAGE 175
HP XP Business Copy Software for Mainframe - Delete Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Delete Pair,,Normal end,,, Seq.=xxxxx +{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD, Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Error(xxxx-yyyy)}],Num. of Pairs=2 [SI z/OS] HP XP Business Copy Software for Mainframe function (for the IBM z/OS) Delete Pair Delete Pair operation Normal end The operation has ended normally. Seq.
PAGE 176
Initialize operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) HP XP Business Copy Software for Mainframe - Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Option,,Normal end,,,Seq.
PAGE 177
HP XP Business Copy Software for Mainframe - Resync Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Resync Pair,,Normal end,,,Seq.=xxxxx +Copy pace=Faster,Resync Type=Normal Copy ++{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD, Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Error(xxxx-yyyy)}],Num.
PAGE 178
HP XP Business Copy Software for Mainframe - Split Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[SI z/OS(R)],Split Pair,,Normal end,,,Seq.=xxxxx +Copy pace=Faster,Split Type=QuickSplit ++{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,0, Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,1,Error(xxxx-yyyy)}],Num.
PAGE 179
HP XP Business Copy Software for Mainframe - Suspend Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[SI z/OS(R)],Suspend Pair,,Normal end,,, Seq.=xxxxx +{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD, Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Error(xxxx-yyyy)}],Num. of Pairs=2 [SI z/OS] HP XP Business Copy Software for Mainframe function (for the IBM z/OS) Suspend Pair Suspend Pair operation Normal end The operation has ended normally. Seq.
PAGE 180
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 171 Detailed Info: Pairsplit-S Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the primary volume in the deleted pair. S-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the secondary volume in the deleted pair.
PAGE 181
456789912345678901234567891123456789212345678, -12345678911234567892123456789312345678941234567895123456789612345678971234567898123 456789 9123456789012345678911234567892123456789312345678941234567895123456789612345, -12345678911234567892123456789312345678941234567895123456789612345678971234567898123 456789 9123456789012345678911234567892123456789312345678941234567895123456789612345} [SNMP] Simple Network Management Protocol function Set SNMP Agent Set SNMP Agent operation Normal end The operation has ende
PAGE 182
HP XP Continuous Access Software - Add Consistency Group (CTG) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Add CTG,,Normal end,,,Seq.=xxxxx +{LDKC,CTG,Path,Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}= {0x00,0x00,Fibre,090,Enable,05,05} [TC] HP XP Continuous Access Software function Add CTG Add Consistency Group operation Normal end The operation has ended normally. Seq.
PAGE 183
HP XP Continuous Access Software - Change Async Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Change Async Option,,Normal end,,, Seq.=xxxxx +{CLPR,Rate(%),Delay Start(%),Delay Increase(%)}={00,050,030,040} [TC] HP XP Continuous Access Software function Change Async Option Change Async Option operation Normal end The operation has ended normally. Seq.
PAGE 184
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 175 Detailed Info: Change Consistency Group (CTG) Option Item Description LDKC The LDKC number. CTG The consistency group number of the consistency group (CT group) where the option is changed. Offloading(s) The value set to the monitoring time of transfer to the side file.
PAGE 185
Detailed Information Detailed information displays for this operation, as shown in the following table. Table 176 Detailed Info: Change Option Operation Item Description Parallel Initial Copy The maximum number of initial copy operations set. (1 to 512) Path Blockade Watch(s) The path blockade watch period set. The unit is second. Path Blockade SIM Watch(s) The path blockade SIM watch period set. The unit is second. Service SIM Indicates whether the remote copy related SIM is reported or not.
PAGE 186
Change Pair Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 177 Detailed Info: Change Pair Option Operation Item Description P-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the primary volume where the pair option is changed sequentially.
PAGE 187
This operation uses the following parameters, as shown in the following table. Table 178 Parameters: Delete Consistency Group (CTG) Operation Parameter Description 0x00:0x00 The LDKC number and the consistency group (CT group) number of the consistency group deleted. LDKC number: 0x00 to 0x01, CT group number: 0x00 to 0x7F Normal end The operation has ended normally. Seq.
PAGE 188
Item Description LDKC The LDKC number of the paired LDKC. ID The path group ID or SSID. When the path group ID is default setting, the output is Default. Controller ID The controller ID. Type The update copy mode set. Sync: Synchronous mode, Async: Asynchronous mode Initial Copy The initial copy mode set. Entire: All copy, None: No copy Fence Level The fence level set (the condition that MCU rejects the write operation to the primary volume).
PAGE 189
Pairresync Pairresync operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 180 Detailed Info: Pairresync Operation Item Description P-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the primary volume in the restored pair sequentially.
PAGE 190
{1A-0x00-0x001,Disable,S-VOL,Group,Drain,Normal End},(snip) -(snip), Num.of Pairs=xx [TC] HP XP Continuous Access Software function Pairsplit-r Pairsplit-r operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 191
HP XP Continuous Access Software - Pairsplit-S Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC],Pairsplit-S,,Normal end,,,Seq.=xxxxxx +{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Type,Force,Range,Result}= -{1A-0x00-0x000, 1B-0x00-0x000,P-VOL,No,Group,Normal End},{1A-0x00-0x001,No,Group, Normal End}, +{1A-0x00-0x002,No,Group,Normal End},(snip) -(snip), Num. of Pairs=xx [TC] HP XP Continuous Access Software function Pairsplit-S Pairsplit-S operation Normal end The operation has ended normally. Seq.
PAGE 192
Item Description Num. of Pairs The number of deleted pairs. HP XP Continuous Access Software - Start Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC], Start Pair,,Normal end,,,Seq.=xxxxxx [TC] HP XP Continuous Access Software function Start Pair Start Pair operation This operation is executed automatically when you use Paircreate or Pairresync, or change the mode to Modify (first time only), in the Pair Operation window. Normal end The operation has ended normally. Seq.
PAGE 193
Detailed information displays for this operation, as shown in the following table. Table 183 Detailed Info: Add Consistency Group (CTG) Operation Item Description LDKC The LDKC number. CTG The consistency group number of the consistency group (CT group) newly registered. Path The channel type set. Fibre: Fibre Channel Offloading(min.) The value set to the offloading timer of the sidefile. The unit is minute. Inflow Control Indicates whether the inflow control to the cache is enabled or disabled.
PAGE 194
Detailed information displays for this operation, as shown in the following table. Table 184 Detailed Info: Add Pair Operation Item Description M-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the volume specified to the main volume when the pair is created. R-VOL(LDEV) The LDEV number of the volume specified to the remote volume when the pair is created. S/N The serial number of the device. LDKC The LDKC number of the paired LDKC. SSID Indicates SSID. Controller ID The controller ID.
PAGE 195
HP XP Continuous Access Software for Mainframe - Change Async Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Change Async Option,,Normal end, Seq.=xxxxxx +{CLPR,Rate(%)}={00,050} [TC z/OS] HP XP Continuous Access Software for Mainframe function (for IBM z/OS) Change Async Option Change Async Option operation Normal end The operation has ended normally. Seq.
PAGE 196
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 186 Detailed Info: Change Consistency Group (CTG) Option Operation Item Description LDKC The LDKC number. CTG The consistency group number of the consistency group (CT group) that the option is changed. Offloading(min.) The value set to the offloading timer of the sidefile. The unit is minute.
PAGE 197
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 187 Detailed Info: Change Option Operation Item Description Parallel Initial Copy The maximum number of initial copy operations set. (1 to 512) Path Blockade Watch(s) The path blockade watch period set. The unit is second. Path Blockade SIM Watch(s) The path blockade SIM watch period set. The unit is second.
PAGE 198
HP XP Continuous Access Software for Mainframe function (for IBM z/OS) Change Pair Option Change Pair Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 199
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) HP XP Continuous Access Software for Mainframe - Delete Consistency Group (CTG) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC z/OS(R)],Delete CTG,0x00:0x00,, Normal end, Seq.
PAGE 200
Delete Pair Delete Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 190 Detailed Info: Delete Pair Operation Item Description VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the volume on the primary site in the deleted pair. PairVOL(LDEV) The LDEV number of the paired volume in the deleted pair.
PAGE 201
[TC z/OS] HP XP Continuous Access Software for Mainframe function (for IBM z/OS) Resume Pair Resume Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 191 Detailed Info: Resume Pair Operation Item Description M-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV number of the main volume in the restored pair.
PAGE 202
HP XP Continuous Access Software for Mainframe - Script Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Script Operation,Run,,Normal end, Seq.=xxxxxx +FileName=script.spt [TC z/OS] HP XP Continuous Access Software for Mainframe function (for IBM z/OS) Script Operation Script Operation operation Run Run is selected as the parameter. This operation uses the following parameters, as shown in the following table.
PAGE 203
Start Pair operation. This operation is executed automatically when you use Add Pair or Resume Pair, or change the mode to Modify (first time only), in the Pair Operation window. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information No detailed information displays for this operation.
PAGE 204
Item Description M-VOL Failure: Main volume write is disabled R-VOL: Main volume write is enabled Range The suspend range set. This value is output when the asynchronous pair is split only. Volume: Volume (specified HP XP Continuous Access Software for Mainframe Asynchronous pairs only are suspended) Group: Group (all other HP XP Continuous Access Software for Mainframe Asynchronous pairs in the same consistency group as the specified pairs are suspended) Mode The setting of unreflected data handling.
PAGE 205
Item Description JNLG The journal group number. MetaData Ratio The ratio of the metadata to the journal data. When the ratio is 1:32, the number for MetaData Ratio is 32. Extent The number of extents. Data Overflow Watch(s) The overflow watch time of the metadata or journal data. The unit is second. Inflow Control Indicates whether inflow control is executed or not. Yes: Controlled, No: Not controlled Copy Pace The speed of initial copy. 150: Low speed. 500: Medium speed.
PAGE 206
-{0x00:0x01:0x3E,Normal end},{0x00:0x01:0x3F,Normal end}] +Num. of JNL Grps=2 [UR] HP XP Continuous Access Journal Software function Journal-Vol Journal-Vol operation Add Add is selected as the parameter. The operation uses the following parameters as shown in the following table. Table 196 Parameters: Journal-Vol Operation Parameter Description Add The journal volume is added. Delete The journal volume is deleted. Normal end The operation has ended normally. Seq.
PAGE 207
+{LDKC,JNLG,Result}=[{0x00,0x80,Normal end},{0x00,0x81,Normal end},{0x00,0x82, Normal end}], Num. of JNL Grps=3 [UR] HP XP Continuous Access Journal Software function Journal-Vol Journal-Vol operation Group-Delete Group-Delete is selected as the parameter. The journal group is deleted. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed information Detailed information displays for this operation, as shown in the following table.
PAGE 208
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 199 Detailed Info: Paircreate Operation Item Description P-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the primary data volume. S-VOL(Port-G-ID-LUN) The port number, host group number and LUN of the secondary data volume. MirrorID The mirror ID.
PAGE 209
Range,M-JNLG, R-JNLG,Error Level,Resync Mode,Result}=[{1A-0x00-0x000,5A-0x00-0x000,0x00,65432, 5,32,0x05, Group,0x02,0x00,Group,Normal,Normal end}, -{1A-0x00-0x001,5A-0x00-0x001,0x00,65432,5,32,0x05,Group,0x02,0x00,Group,Normal, Normal end}], Num. of Pairs=2 [UR] HP XP Continuous Access Journal Software function Pairresync Pairresync operation Normal end The operation has ended normally. Seq.
PAGE 210
Item Description Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs. HP XP Continuous Access Journal Software - Pairsplit-r Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UR],Pairsplit-r,,Normal end,,,Seq.
PAGE 211
Item Description S-VOL Write Indicates whether writing to the secondary volume is enabled. Disable: Disabled, Enable: Enabled Range The split range. LU: LU range, Group: Group range Suspend Mode The suspend mode. Purge: Purge mode, Flush: Flush mode Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs.
PAGE 212
Item Description CTRLID The controller ID. Type Indicates whether the deleted data volume is a primary or secondary data volume. P-VOL: Primary, S-VOL: Secondary Range The delete range. LU: LU range, Group: Group range Delete Mode The delete mode. Normal: Normal mode, Force: Force mode Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code,yyyyy: Error code Num. of Pairs The number of pairs.
PAGE 213
Item Description MirrorID The mirror ID. M-JNLG The master journal group number. R-JNLG The restore journal group number. Error Level The error level. LU: volume level, Group: group level Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of changed pairs.
PAGE 214
HP XP Continuous Access Journal Software for Mainframe Add-Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UR z/OS(R)],Add-Pair,,Normal end,,, Seq.=xxxxxx +{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,Priority, Initial Copy, M-JNLG,R-JNLG,Path Gr.
PAGE 215
Item Description Path Gr. ID The path group ID (Default fixed) set for the storage system. Error Level The error level: Group: Group level, Volume: Volume level CFW Indicates whether the cache-fast-write data is copied to the secondary data volume is enabled or not. Only P-VOL: Not copied, Copy to S-VOL: Copied Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs.
PAGE 216
Delete-Pair Delete-Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed information Detailed information displays for this operation, as shown in the following table. Table 206 Detailed Info: Delete-Pair Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of the primary data volume. S-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of the secondary data volume. MirrorID The mirror ID.
PAGE 217
++{LDKC,JNLG,MirrorID,S/N,CTRLID,Cmd.Dev.(LDKC:CU:LDEV),Result}=[{0x01,0x00,0x01, 65433,5,0x00: 0x20:0x00,Normal end}] +Num. of EXCTGs=2 [UR z/OS] HP XP Continuous Access Journal Software for Mainframe function (for IBM z/OS) Edit-EXCTG Extended consistency group operation Add Add is selected as the parameter.
PAGE 218
Item Description Num. of EXCTGs The number of extended consistency groups for which the configuration has been changed. HP XP Continuous Access Journal Software for Mainframe Journal-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UR z/OS(R)],Journal-Option,,Normal end, Seq.
PAGE 219
Item Description Copy Pace The speed of initial copy. 150: Low speed, 500: Medium speed, 1500: High speed Timer Type The timer type. System: System timer, Local: Local timer, None: No timer Path Watch Time The path blockade watch period set. The unit is minutes, hours or days. If it is set to 30 minutes, it will be 30(min.). Forward Path Watch Time Indicates whether to transfer the path blockade watch period set to the master journal group to the restore journal group.
PAGE 220
Add is selected as the parameter. The operation uses the following parameters, as shown in the following table. Table 210 Parameters: Journal-Vol Operation Parameter Description Add The journal volume is deleted. Delete The journal volume is deleted. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 221
Group-Delete is selected as the parameter. The operation uses the following parameters, as shown in the following table. Table 212 Parameters: Journal-Vol Operation Parameter Description Group-Delete The journal group is deleted. Remove-JNLG (Force) The journal group is forcibly deleted from the extended consistency group. Normal end The operation has ended normally. Seq.
PAGE 222
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 214 Detailed Info: Pair-Option Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of the primary data volume. S-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of the secondary data volume. MirrorID The mirror ID.
PAGE 223
Resume-Pair Resume-Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Table 215 Detailed Info: Resume-Pair Operation Item Description P-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of the primary data volume. S-VOL(LDKC:CU:LDEV) The LDKC, CU and LDEV numbers of the secondary data volume. MirrorID The mirror ID. S/N The serial number of the logical device storage system. CTRLID The controller ID.
PAGE 224
Suspend Mode,Result}=}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,P-VOL,Disable, Volume, Flush, Normal end}, -{0x00:0x00:0x01,0x00:0x20:0x00,0x01,65432,5,P-VOL,Disable,Volume,Flush,Normal end}, Num. of Pairs=2 [UR z/OS] HP XP Continuous Access Journal Software for Mainframe function (for IBM z/OS) Suspend-Pair Suspend-Pair operation Normal end The operation has ended normally. Seq.
PAGE 225
HP XP Continuous Access Journal Software for Mainframe System-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[UR z/OS(R)],System-Option,Normal end,,, Seq.
PAGE 226
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) HP XP External Storage Software - Alternate-Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UVM],Alternate-Path,,Normal end,,,Seq.=xxxxx [UVM] HP XP External Storage Software function Alternate-Path Alternate-Path operation Normal end The operation has ended normally. Seq.
PAGE 227
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 219 Detailed Info: Change-CacheMode Operation Item Description Group External volume group number for the executed setting operation. Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num.
PAGE 228
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End}, {E1-4,Normal End}],Num. of Groups=XXX [UVM] HP XP External Storage Software function ChkPath-RestoreVol ChkPath-Restore Vol operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 229
Sequence number of log information (0000000000 to 4294967295) HP XP External Storage Software - Delete-Vol (Normal) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UVM],Delete-Vol(Normal),,Normal end,,, Seq.=xxxxx [UVM] HP XP External Storage Software function Delete-Vol (Normal) Delete-Vol (Normal) operation (delete volume) Normal end The operation has ended normally. Seq.
PAGE 230
HP XP External Storage Software - Disconnect-Volume Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UVM],Disconnect-Volume,,Normal end,,,Seq.=xxxxxx +{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End}, {E1-4,Normal End}],Num of Groups=XXX [UVM] HP XP External Storage Software function Disconnect-Volume Disconnect-Volume operation Normal end The operation has ended normally. Seq.
PAGE 231
HP XP External Storage Software function Inflow-Control Inflow-Control operation Enable Enable is selected as the parameter. The operation uses the parameters shown in the following table. Table 222 Parameters: Inflow-Control Operation Parameter Description Enable The cache memory is used. Disable The cache memory is not used. Normal end The operation has ended normally. Seq.
PAGE 232
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 224 Detailed Info: WWN Timer Operation Item Description WWN The WWN of the external subsystem. I/O-TOV The I/O time over value set. Quedepth The Quedepth value (the number of commands that can be issued). LinkDown The Path Blockade watch value. Result The result of operation.
PAGE 233
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 226 Detailed Info: Install Customized Volume (CV) Operation Item Description PG The parity group number. NOTE: The parity group number whose first letter is E indicates that an external volume is present in the parity group. LDKC:CU:LDEV The LDKC, CU and LDEV numbers.
PAGE 234
Make Volume operation No parameter or Non Format No parameter is selected. This operation uses the following parameters, as shown in the following table. Table 227 Parameters: Make Volume Operation Parameter Description No parameter Formatted Make Volume. Non Format Unformatted Make Volume. Normal end The operation has ended normally. Seq.
PAGE 235
Virtual LVI / Virtual LUN (VLL) - Set SSID Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VLL],Set SSID,,Normal end,,,Seq.=xxxxxx +{SSID,LDKC:CU:LDEV}=[{XXXXX,0xXX:0xXX:0xXX},{XXXXX,0xXX:0xXX:0xXX}],Num. of SSIDs=2 [VLL] Virtual LVI / Virtual LUN function Set SSID Set SSID operation Normal end The operation has ended normally. Seq.
PAGE 236
No parameter is selected. This operation uses the following parameters, as shown in the following table. Table 230 Parameters: Volume Initialize Operation Parameter Description No parameter Formatted Volume Initialize. Non Format Unformatted Volume Initialize. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 237
Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 232 Detailed Info: Volume to Space Operation Item Description PG The parity group number. NOTE: The parity group number whose first letter is E indicates that an external volume is present in the parity group. LDKC:CU:LDEV The LDKC, CU and LDEV numbers. Num. of LDEVs The number of LDEVs.
PAGE 238
Sequence number of log information (0000000000 to 4294967295) HP XP Auto LUN Software (VM) - Set Migration Vol Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VM],Set Migration Vol,,Normal end,,, Seq.
PAGE 239
HP XP Auto LUN Software (VM) - Set Reserved Vol Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VM],Set Reserved Vol,,Normal end,,, Seq.=xxxxxx +{Set,LDKC:CU:LDEV,Result}=[{Reserved,0x00:0x00:0x00,Normal end}, { Reserved,0x00:0x00:0x01,Normal end},{ Reserved,0x00:0x00:0x02,Normal end}, { Reserved,0x00:0x00:0x03,Normal end},{ Reserved,0x00:0x00:0x04,Normal end}, { Reserved,0x00:0x00:0x05,Normal end}, { Reserved,0x00:0x00:0x06,Normal end}] Num.
PAGE 240
++CU=[0xXX:0xXX,0xXX:0xXX] ,Num. of CUs=xx ++SSID=[0xXXXX,0xXXXX],Num. of SSIDs=xx ++CLPR=xx:xxxxxxxxxxxxxx,Cache(MB)=xxxxx,Cache Residency(MB)=xxxx, Num. of Cache Residency Areas=xxxx +++PG=[xx-xx,xx-xx],Num. of PGs=xx ++Num. of CLPRs=xx +Num. of SLPRs=xx [VPM] HP XP Disk/Cache Partition function Set Set Operation operation Normal end The operation has ended normally. Seq.
PAGE 241
Item Description Cache Residency(MB) The Cache Residency capacity set. The unit is megabyte (MB). Num. of Cache Residency Areas The number of Cache Residency areas set. PG The parity group number assigned to CLPR. NOTE: When the external volume is present in the parity group, the first letter of the parity group number is E. Num. of PGs The number of parity groups assigned to CLPR. Num. of CLPRs The number of CLPRs by set SLPR. Num. of SLPRs The number of SLPRs set.
PAGE 242
Item Description Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of LDEVs The number of logical volumes to which the access attribute is set. Volume Retention Manager (VRM Function) - VTOC Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[VRM],VTOC,,Normal end,,,Seq.
PAGE 243
[VS] VS function End Shredding End Shredding operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 238 Detailed Info: End Shredding Operation Item Description Times The execution sequence (1 to 8) of shredding operations. Result The result of the shredding operation.
PAGE 244
Detailed Information Detailed information displays for this operation, as shown in the following table. Table 239 Detailed Info: Set Shredding Operation Item Description OwnerID The owner ID. 0: Indicates HP XP Remote Web Console 0xXX: Owner ID is expressed in two digits of the hexadecimal format Data The data type. Random: Random, 0xXXXX: Define Output File Indicates whether the result of shredding is output to the file. Disable: No output, Enable: Output Num. of Data The number of data types.
PAGE 245
Detailed information displays for this operation, as shown in the following table. Table 240 Detailed Info: Suspend Shredding Operation Item Description Target OwnerID The owner ID. 0: Indicates HP XP Remote Web Console 0xXX: Owner ID is expressed in two digits of the hexadecimal format. Volume Security (VSEC) - Set Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[VSEC],Set Group,,Normal end,,,Seq.
PAGE 246
0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, (snip) -0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff],Num. of LDEVs=xxx Num. of LDEV Groups=xx [VSEC] Volume Security function Set Group Set Group operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table.
PAGE 247
Item Description LPAR The logical partition number of the host. Attr The manufacturer of the host. CNT(EX): Channel extender, HTC: HP, IBM: IBM, FJT: Fujitsu Num. of Hosts The number of hosts. Port The port name registered in the host group. Num. of Ports The number of ports registered. Num. of Host Groups The number of host groups. CU The CU number registered in the LDEV group. LDEV The LDEV numbers registered in the LDEV group. Num. of LDEVs The number of LDEVs registered. Num.
PAGE 248
Add V-Vol (X) operation for HP XP Thin Provisioning Software Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) V Volume (VVOL) - Connect/Release Pool Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VVOL], Connect/Release Pool,,Normal end, Seq.=xxxxx +{Command,LDKC:CU:LDEV,Pool ID,Warn Threshold(%)}=[{Connect,0x00:0x00:0x00,0,80}, {Connect,0x00:0x00:0x01,0,80},{Connect,0x00:0x00:0x02,0,80}],Num.
PAGE 249
V Volume (VVOL) - Delete V-Vol (V) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VVOL],Delete V-Vol(V),,Normal end,,,Seq.=xxxxx [VVOL] V Volume function Delete V-Vol (V) operation Delete V-Vol (V) operation for HP XP Snapshot Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) V Volume (VVOL) - Delete V-Vol (X) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VVOL],Delete V-Vol(X),,Normal end,,,Seq.
PAGE 250
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in the following table. Table 243 Detailed Info: Pool Change / Delete Operation Item Description Command The operation to the pool. Change: Changing pool information Delete: Delete pool Pool ID The pool ID of the pool where the settings have been changed or the number of the pool that have been deleted. Pool Type The pool type. 1 is always output.
PAGE 251
V Volume (VVOL) - Pool Restore Operation user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VVOL],Pool Restore,,Normal end,,,Seq.=xxxxx +{Pool ID, Result}=[{1,Normal end}, {2,Normal end },{2,Normal end},{128,Normal end}] Num. of Pools = 3 [VVOL] V Volume function Pool Restore Pool Restore operation Normal end The operation has ended normally. Seq.
PAGE 252
Detailed Information Detailed information displays for this operation, as shown in the following table. Table 245 Detailed Info: Pool SIM Comp Req Operation Item Description SIM The reference code of the Service Information Message (SIM) generated in the storage system with resolved errors or service request status. 0xXXXXXX: Reference code of the SIM Num. of SIMs The number of SIMs with resolved errors and service request status.
PAGE 253
Item Description Num of Pool The number of the created pool. LDKC:CU:LDEV The LDKC number, the CU number and the LDEV number of the pool volume. LDEV Result The result of the pool volume creation. Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed xxxx: Part code, yyyy: Error code Num. of LDEVs The number of the created pool volume.
PAGE 254
Sample Audit Logs
PAGE 255
A Audit Log Information File Output by Function This appendix includes more detailed information about the audit log information file. Table 247 lists audit log information file output for operations that are common to all HP XP Remote Web Console functions. Table 248 lists audit log information file output for each program option in the HP XP Remote Web Console Main window.
PAGE 256
Option Operation Menu Items for Launching Options LUN Security Extension Tab Output of Audit Log Information File Operation Function Name Operation Name Command Device: Enable –> Disable Set CommandDev (Note 1) Cmd Dev.Security: Disable –> Enable Set CommandDevSec (Note 1) Cmd Dev.
PAGE 257
Option Operation Menu Items for Launching Options Output of Audit Log Information File Tab Operation Function Name Port (Note 4) Standard Mode Set Speed Mode (Note 1) High Speed Mode Set Speed Mode (Note 1) High Speed (2Port) Mode Set Speed Mode (Note 1) Fibre Addr.
PAGE 258
Option Operation Menu Items for Launching Options Volume Manager Tab LUSE (Note 5) Output of Audit Log Information File Operation Function Name Authentication Mode: Set FCSP Port Switch bi-directional –> unidirectional (Note 1) (Note 2) Authentication Mode: Set FCSP Port Switch unidirectional –> bi-directional (Note 1) (Note 2) Authentication (Port): Enable –> Disable Set FCSP Port Switch Authentication (Port): Disable –> Enable Set FCSP Port Switch Make LUSE (Note 1) (Note 2) (Note 1) (
PAGE 259
Option Operation Menu Items for Launching Options Tab Output of Audit Log Information File Operation Function Name Operation Name Delete Pool V-VOL Initialize Pool Pool Initialize (Note 1) Restore Pool Pool Restore (Note 1) Pool SIM Complete Request Pool SIM Copm Req (Note 1) New V-VOL Group Add V-Vol (V) (Note 1) Add V-Vol (X) (Note 1) Delete V-Vol (V) (Note 1) Delete V-VOL Group Delete V-Vol (X) (Note 1) Cache Residency Performance Control Base Monitor Cache Residency Monitoring Options
PAGE 260
Option Operation Menu Items for Launching Options Tab Output of Audit Log Information File Operation Function Name Erase Migration History HP XP Continuous Access Pair Operations Paircreate Operation Name Del Migration Log TC Paircreate (Note 1) Start Pair Pairsplit-S Pairsplit-S (Note 1) Pairsplit-r Pairsplit-r (Note 1) Pairresync Pairresync (Note 1) Start Pair RCU Operations Asynchronous Operations Other Operations 260 Change Pair Option Change Pair Option (Note 1) Change to Modify M
PAGE 261
Option Operation Output of Audit Log Information File Menu Items for Launching Options Tab Operation Function Name Operation Name HP XP Continuous Access Journal JNL Operation Edit JNL Volumes UR Journal-Vol (Note 1) Disk Controller (DKC ) Operation Pair Operation HP XP Business Copy Change JNL Option Journal-Option (Note 1) Delete JNL Groups Journal-Vol (Note 1) Pairsplit-r Pairsplit-r (Note 1) Pairresync Pairresync (Note 1) Pairsplit-S Pairsplit-S (Note 1) Add Disk Controller (DKC
PAGE 262
Option Operation Menu Items for Launching Options Tab Output of Audit Log Information File Operation Function Name Operation Name Pairresync Pairresync (Note 1) Pairsplit-E Pairsplit-E (Note 1) Pairsplit-S Pairsplit-S NOTE: Function name is Snapshot when HP XP Snapshot pair is deleted.
PAGE 263
Option Operation Menu Items for Launching Options Tab Asynchronous Operations Script Operations Output of Audit Log Information File Operation Function Name Operation Name Port Change (Target, Initiator, RCU Target) PORT Change Port Add Consistency Group TC z/OS (R) Add CTG Consistency Group Option Change CTG Option Delete Consistency Group Delete CTG Async Option Change Async Option Run Script Operation Stop Other Operations Universal Replicator Mainframe JNL Operation Disk Controll
PAGE 264
Option Operation Menu Items for Launching Options Tab Pair Operation Function Name Operation Name Add Path Add Path (Note 1) (Note 2) Delete Path Delete Path (Note 1) (Note 2) Port Change (Target, Initiator, RCU Target) PORT Change Port Add Pair UR z/OS (R) Add-Pair (Note 1) Suspend-Pair (Note 1) Resume Pair Resume-Pair (Note 1) Delete Pair Delete-Pair (Note 1) Change Pair Option Pair-Option (Note 1) Change System Option System-Option (Note 1) Clear SIM Clear-SIM (Note 1) EXCTG Ope
PAGE 265
Option Operation Output of Audit Log Information File Menu Items for Launching Options Tab Operation Function Name Operation Name Mainframe Connection Parallel Access Volumes Add CPAV Add Alias (Note 1) Delete Alias (Note 1) Delete Volume Security Set Group VSEC Set Group (Note 1) Volume Retention Mainframe Attribute VRM Attribute (Note 1) VTOC (Note 1) Volume Table of Contents Data Retention Data Retention Attribute / S-VOL / Reserved/ DRU Attribute (Note 1) Mode Clear / Retentio
PAGE 266
Option Operation Menu Items for Launching Options Configuration File Loader Output of Audit Log Information File Tab Operation Function Name Operation Name Port Operation Change to Target / Change to External PORT Change Port Configuration File Loader Upload CFL LUNM Operation VRM Operation NOTE: The log information is not output for the format violation and inconsistency of configuration.
PAGE 267
Note 3: When you perform two or more LUN Manager operations, the following conditions apply: • When you perform two or more operations on one target and select Apply, the log information is output as one entry. • When you apply two or more settings at one time, the log information is output according to the priority shown in Table 249. If the priority is the same, the log information is output in the order of the operations performed.
PAGE 268
Note 4: When you set two or more port settings, the following conditions apply: • When you perform two or more operations for one target, the log information is output as one entry. • The log information is output in the order of the operations performed. • If you perform the following operations at the same time, the following happens: Change 1 –> Change 2: Log information is output for the Change 2 operation.
PAGE 269
B SVP Operations Output to the Audit Log File Table 250 describes SVP operations and the operation name that is output to Audit Log File.
PAGE 270
GUI operation SVP start button Output of Audit Log File Function Operation Function Name Operation Name Change Configuration Installation Install De-installation Uninstall System Option System Option Disk Unit (DKU) Emulation DKU Emulation System Tuning System Tuning LUN Configuration Set Fibre Address Set Fibre Topology Set Channel Speed Set CommandDev Set CommandDevSec Add LU Path Delete LU Path Set Speed Mode Set Host Mode Set Security Switch Add WWN Delete WWN Change WWN Add Host Group
PAGE 271
GUI operation SVP start button Output of Audit Log File Function Operation Function Name Operation Name Force Reset Make LUSE Release LUSE DCR Configuration DCR Prestaging M/F DCR Open DCR CVS Configuration Install CV Volume to Space Make Vol./Vol.
PAGE 272
GUI operation SVP start button Information 272 Output of Audit Log File Function Operation Function Name Setting Battery Life Setting Battery Life Set Battery Life Set Machine Install Date Set Machine Install Date Machine Install Date Log SIM Complete Information Operation Name SIM Complete Log Delete Delete Log SIM Reporting Option SIM Reporting Option Threshold Value Alter Threshold Value Online Read Margin Reset ORM Value SVP Operations Output to the Audit Log File
PAGE 273
C Acronyms and Abbreviations API application program interface CFL Configuration File Loader CHA channel adapter CLPR Cache Logical Partition (part of HP XP Disk/Cache Partition) CPAV HP XP for Compatible Parallel Access Volumes Software CT consistency CTG consistency group CU control unit CV custom volume, customized volume (part of Virtual LVI/LUN) DASD direct-access storage device DCR Dynamic Cache Residency (also called Cache Residency Manager DFW DASD fast write DKA disk adapte
PAGE 274
LCP local control port LDEV logical device LU logical unit LUN logical unit number LUNM LUN Manager LUSE LUN Expansion (also called LU Size Expansion) LVI logical volume image MCU main control unit MIB message information block MU mirror unit M-VOL main volume NVS nonvolatile storage P.P.
PAGE 275
SFP small form-factor pluggable SHRED Volume Shredder SIM service information message SLPR Storage Logical Partition (part of HP XP Disk/Cache Partition) SM shared memory SMPL simplex SNMP simple network management protocol SSID subsystem ID S-VOL secondary volume (HP XP Continuous Access Software), source volume (HP XP Business Copy Software for Mainframe) SVP service processor T-VOL target volume VDEV virtual device VLL Virtual LVI / Virtual LUN VM HP XP Auto LUN Software VMA
PAGE 276
Acronyms and Abbreviations