HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 187 Detailed Info: Change Option Operation
DescriptionItem
The maximum number of initial copy operations set. (1 to 512)Parallel Initial Copy
The path blockade watch period set. The unit is second.Path Blockade
Watch(s)
The path blockade SIM watch period set. The unit is second.Path Blockade SIM
Watch(s)
Indicates whether the remote copy related SIM is reported or not.Service SIM
Report, Not Report
Indicates whether the parallel operation of initial copy by CU is enabled or not.Parallel Initial
Copy(CU)
Enable, Disable
The LDKC number.LDKC
The CU number of the CU on the primary site.CU
Indicates whether the remote copy related SIM is reported or not.Service SIM
Report, Not Report
Indicates whether the host supports PPRC or not.PPRC Support
Yes: Support, No: Not support
The SCP delay time when the pair is suspended. The unit is second.SCP Time(s)
The number of parallel operation of initial copy by CU. (1 to 16)Parallel Initial
Copy(CU)
The number of CUs set.Num. of CUs
HP XP Continuous Access Software for Mainframe - Change
Pair Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Change Pair Option,,Normal end,
Seq.=xxxxxx
+{M-VOL(LDKC:CU:LDEV),Fence Level,CFW, Error Level,Result}=
-{0x00:0x00:0x00,Never,Copy To R-VOL,Group,Normal End},{0x00:0x01,Never,
Copy To R-VOL,Group,Normal End},
(snip)
-(snip), Num. of Pairs=xx
[TC z/OS]
XP24000 Audit Log User and Reference Guide 197