HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 226 Detailed Info: Install Customized Volume (CV) Operation
DescriptionItem
The parity group number.PG
NOTE:
The parity group number whose first letter is E indicates that an external volume
is present in the parity group.
The LDKC, CU and LDEV numbers.LDKC:CU:LDEV
The start LBA.Start LBA
NOTE:
A hyphen (-) is output when not specified.
The emulation type.Emulation
The user-specified capacity.Size
The unit of the CV capacity.Unit
NOTE:
The output unit is different according to the setting.
KB: For open-system volume
Cyl: For mainframe-system volume
LBA: When LBA is specified
Indicates system disk status.System Disk
Enable: Enabled, Disable: Disabled
The number of LDEVs.Num. of LDEVs
Virtual LVI / Virtual LUN (VLL) - Make Volume Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VLL],Make Volume,,Normal end,,,Seq.=xxxxxx
+[PG,LDKC:CU:LDEV,Emulation,Size,Unit,System Disk]=[{X-X-(X),0xXX:0xXX:0xXX,OPEN-V,
XXXXXXXXXXXXXXXX,KB,Disable },
{X-X-(X),0xXX:0xXX:0xXX,OPEN-V,XXXXXXXXXXXXXXXX,KB,Disable}],Num. of LDEVs=2
[VLL]
Virtual LVI / Virtual LUN function
Make Volume
XP24000 Audit Log User and Reference Guide 233