HP StorageWorks XP24000 Audit Log User and Reference Guide, v01 (AE131-96003, June 2007)

Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 23 Detailed Info: Data Retention Utility (DRU) Attribute Operation
DescriptionItem
The LDKC number, the CU number and the LDEV number of the logical volume where
the attribute is set.
LDKC:CU:LDEV
The set attribute in hexadecimal. Each bit (0−7) of 1 byte corresponds to the setting item.
1 is assigned to each bit when the setting is enabled and 0 (zero) is assigned to each
bit when the setting is disabled. Each bit represents the following attributes:
Attribute
Bit 0: Mounting of LEDV (fixed to 1)
Bit 1: Setting of S-VOL Disable
Bit 2: Setting of Zero Read Cap mode
Bit 3: Setting of Invisible mode
Bit 4: Setting of reserve
Bit 5: Fixed to 0 (zero)
*
Bit 6: Setting of Read Only attribute
*
Bit 7: Setting of Protect attribute
*
When 0x88 is output to the attribute, for example, Read/Write attribute is set to the
logical volume to show that the reserve setting has been enabled.
NOTE:
A hyphen (-) is output when setting is not changed.
The number of days set in Retention Term.RT
NOTE:
A hyphen (-) is output when setting is not changed.
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of the logical volume(s) where the attribute has been set.Num. of LDEVs
* When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set.
Data Retention Utility (DRU) - Expiration-Lock Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[DRU],Expiration-Lock,SLPR#xx:Enable,
Normal end,,,Seq.=xxxxx
[DRU]
Data Retention Utility function
XP24000 Audit Log User and Reference Guide 59