HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
1005 1021
An error occurred. If this
problem persists, please call
technical support.
The specified volume
does not exist. (You
have specified wrong
CU#:LDEV#.) Or the LD EV
(exclusively for mainframe)
cannot
be processed in this
agent. The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
1005 1022
An error occurred. If this
problem persists, please call
technical support.
Host mode is invalid. (The
specified value i s not in the
specification.) The error
does
not occur normally
because it is guarded in
the
screen. In the unlikely
eventthatthiserror occurs,
contact technical support.
E
2
1005 1023
An error
occurred. If this
proble
m
persists, please call
techni
cal support.
If this problem persists, call
technical supp ort.
E
2
1005 1024
An error occurred. If this
problem persists, please call
technical support.
Fibre topology information is
invalid. (The specified value
is not
in the specification.)
The error does not occur
normally because it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
1005 1025
The specified LU path does
not exist.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1
005
1
028
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
Th
eConfiguration
information has been
already changed.
Please check the settings
a
nd
request the setting of the
configuration information
again.
E
6
1005 1029
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
1005 1050
The following volumes
cannot
be specified when
you change expanded LU
configurations:
•
Volumes reserved by
Auto LUN
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
104
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes