HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
1005 1178
An incorrecthostnamewas
specified.
Please correct the settings,
then retry.
E
6
1005 1180
An error occurred. If this
problem persists please cal l
technical support.
If this problempersistscall
technical support.
E
2
1005 1181
The specified p
ath cannot be
added, becaus
ethe volume
is
used by a Co
ntinuous
Access pair.
Correct the sp
ecification,
then retry th
eoperation.
W
6
1005 1182
An error occurred. If this
problem persists please cal l
technical support.
If this problempersistscall
technical support.
E
2
1005 1183
The port information is
inconsistent with PCB mo de
information.
Please correct the port
information or the PCB
mode information.
W 0
1005
1184
The port in
formation is
inconsist
ent with PCB mode
informati
on.
Please correct the port
information or the PCB
mode information.
W
0
1005 1185
You are trying to insert
in the
linkage operation
including LUSE. (LD EV
number is inserted to the
LDEV numbers created in
LUSE).
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1186
In the linkage operation
including LUSE, the path is
specified to other than the
top.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1187
You cannot expand the LU
because the host mode of
the
group with paths which
are defined in the LU is
corresponding to online
LUSE.
The Co
nfiguration
information has been
already changed.
Please check the settings
and
r
equest the setting of the
configuration information
again.
E
6
1005 1190
To define a path to the
volume from an iSCSI
port, the volume must be
read/write-enabled and
also usable as an S-VOL
(secondary volume).
Correct the settings, then
retry the operation.
E
6
1005 1194
No information can be
changed about this external
port because the port has
an
external volume.
Please correct the settings,
then retry.
E
6
1005 1195
The specified volume(s) are
used as a command device.
Please correct the settings,
then retry.
E
6
XP24000 Remote Web Console Error Codes
109