HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
1005 55553
The specified port is not a
fibre port.
Check the setting.
E
6
1005 55554
The specified WWN is not
registered.
Check the setting.
E
6
1005
55555
Thevalue of theWWN is
not specified or is set to
zero.
Check the setting.
E
6
1005 55556
The specified port is not an
iSCSI port.
Check the setting.
E
6
1005
55557
The specified iSCSI name is
not registered.
Check the setting.
E
6
1005 55558
Thevalue of theiSCSI name
is not
specified or is set to
zero.
Check the setting.
E
6
1005 55559
The specified pa ckage
cannot
be set because the
package is for iSCSI .
Check the setting.
E
6
1005 55560
The fibre address, topology,
channel speed, and
Initiator/Target cannot
be
changed because the
specified port is an iSCSI
port.
Check the setting.
E
6
1005 55561
An error occurred during
SVP proc
essing. If this
problem
persists, please call
techni
cal support.
If this p
roblem persists, call
technic
al
support.
E
2
1005 55566
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
1005 55 568
Thenicknameofthe
specified target name or
iSCSI name is already
registered.
Check the setting.
E
6
1005 55569
The s
pecified Group-ID is
alre
ady registered.
Check the setting.
E
6
1005 55570
Thecharacter or thenumber
of characters that cannot
be
specified was specified
in
target name, target
alias, iSCSI name and the
nickname of iSCSI name.
Check the setting.
E
6
1005
55571
The target cannot be
set
because the number
of targetsexceedsthe
maximum that can be set in
aport.
Check the setting.
E
6
116
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes