HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Table 34 Error Codes — Part Code 3010
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
3010
1046
The number of Cache
Residency Manager settings
has
exceeded the maximum
number of available Cache
Residency Man ager areas.
Reduce the number of
Cache Residency Manager
settings, then retry the
operation.
W
5
3010 5010
The specified SSID falls out
of range. Please specify a
validSSID, andthenretry
the
operation.
Correct the specified
content, and retry.
W
5
3010 5011
Specify a value that is one
cylinder or mor e.
Correct the specified
content, and retry.
W
5
3010 5012
Seta valuethatis35MB
(72,000 blocks) or more.
Correctthe setvalue, then
retry the operation.
W
5
3010 5030
There are no LDEVs which
can be initialized. Specify
LDEVs which are not Auto
LUN reserved volumes.
Correct the specified
content, and retry.
W
5
3010 5031
No LDEV is specified.
Correct the specified
content, and retry.
W
5
3010 5040
The specified value exceeds
the
maximum.
W
5
3010 5050
Failed to perform the Volume
to Space operation because
the
specified LD EV is the last
LDEV in the VDEV.
Check the content of the
operation.
W
5
3010 5051
Free space is required for
Install CV to operate.
Check the content of the
operation.
W
5
3010 5052
The specified LDEV is
already in use.
Check the content of the
operation.
W
5
3010 5053
The specified SSID is already
in
use.
Check the content of the
operation.
W
5
3010
5054
Executeone of thefollowing
before deleting the LDEV:
However, LDEV cannot
be
deleted for the Remote
Command Device.
•
delete paths associated
with the LDEV
•
release the LUSE volume
•
release the reserved
volume of Auto LUN
•
remove Volume Security
settings from the volume
• set
access attribute of
the
LDEV to Read/Write
•
remove P ool settings
from the volume
•
remove JNL settings from
the
volume
Check the content of the
operation.
W
5
XP24000 Remote Web Console Error Codes
143