HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
5310 9313
The control status will
change to WWN Control.
The control status w ill
change to WW N Control.
Please click [OK].
W
5
5310
9314
There is no control, because
the upper value is 0 in all
ports.
Please set up a maximum
value to control.
W
5
5310 9315
The monitori
ng
switch is
turned OFF. If you use
the
real time option for
the
first time, turn ON the
monitoring switch.
Turn on the monitoring
switch to display the
monitoring data in real time.
i
5
5310 9326
The control status will
change to No Control.
Please continue work, when
you may change in the state
where it does not control.
W
5
5310 9328
Settings on removed ports
still
remain. To clear the
settings, please check the
Delete ports if CHIP board
is
removed check box and
then
select the Apply but ton.
To clear settings on removed
ports, check the Delete ports
if CHA
is removed check
box, then click [Apply].
N
5
5310 9329
If you w
ant to continue
initia
lization, please select
OK
on th
enextwindow.
If
you
want to quit the
opera
tion, please select
Cance
l
on the next window.
If you c
lick [OK] on the next
window
,the settings on port
contro
lwillbeinitialized.
To qui
tthe operation,
click
[Cancel] on the n ext
windo
w.
W
5
5310 9330
If you want to continue
initialization, please select
OK
on the next window.
If youwanttoquitthe
operation, please select
Cancel on the next window.
If you click [OK] on the
next window, the set t ings
on
WWN control will be
initialized. To quit the
operation, click [Cancel] on
the next window.
W
5
5310 9331
The specified WWN is
already in use.
Correct the specified
contents, and request the
setting o f the configuration
information again.
W
5
5310 9333
Do
you want to change
th
e
control status to Port
C
ontrol?
Click [Yes] to change the
control status.
I 5
5310
9334
Do you want to change
the
control status to WWN
Control?
Click [Yes] to change the
control status.
I 5
5310 9335
Do you want to change the
control status to No Control?
Click [Yes] to change the
control status.
i
5
5310 59000
The Performance Control
group extends across
multiple SLPRs. Do you want
to
continue?
To continue processing, click
[OK]. To stop processing,
click [Cancel].
i
0
XP24000 Remote Web Console Error Codes
195