HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Continuous Access XP Media

Part

Code

Error

Number

Error Messag e

Recommended Ac tion

Severity

Level

Failure

Level

6005 8701

Logical Path between the

MCU and the RCU is not

active.

A logical path does not exist

between the MCU and the

RCU. Check the path status

on

RCU Status screen, and

reestablish the paths with

Edit Path.

i

4

6005 8702

The pair status of the M-VOL

is not

valid.

Thetypeofpairstatusisnot

permitted for this operation.

Refresh and check the

screen. If the M-VOL status

permits the operation, retry

the operation.

i

4

6005 8703

The speciﬁed number

of Paths islessthan the

Minimum number of Paths

on

RCU Option screen.

The number

of pathsisless

than the mi

nimum

number

speciﬁed o

nthe RCUOption

screen. C

heck the number

of

paths,

establish the

minimum n

umber of paths,

and

retr

ythe operation.

i

4

6005 8704

The speciﬁed number of

paths islessthan the

minimum number of paths

on

the RCU option screen

due to a communication

error between the MCU

and

the RCU, or the device

emulation type of the

R-VOL is not supported by

Continuous Access via serial

interface.

Please check the paths

status on the

RCU Status

screen, and reestablish

the paths on the Edit Path

screen. Please see th e

OPENPLATFORM SECTION

in the maintenance manual

to

conﬁrm whether the

device emulation type of

the R-VOL is supported by

Continuous Access via serial

interface.

W 4

6005 8705

The path could not

be deleted due to a

communication error

between MCU and RCU.

Either a communication

error occurred between

the MCU and the RCU,

or the

CHA has become

blocked. Please call

technical support.

W 4

6005 8706

Parameter speciﬁed

by Continuous Access

operation is invalid.

Ap

arameter speciﬁed by

t

he Continuous Access

o

peration is invalid. For

e

xample, the R-VOL that

is

speciﬁed could already

be in

use as the R-VOL of

another Continuous Access

pair.

i

4

6005 8708

The pair status of the R-VOL

is not

valid.

Check the pair status for

Continuous Access. If the

requested R-VOL is in a

permissible status, retry the

operation.

i

4

6005 8709

Continuous Access

operation was rejected.

All channel adapters are

not

active for Continuous

Access. Please call technical

support.

E

4

XP24000 Remote Web Console Error Codes

197