HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Continuous Access XP Media

Part

Code

Error

Number

Error Message

Recommended Action

Severity

Level

Failure

Level

6005 8731

The existing logical

addresses are not equal.

The logical addresses of all

existing paths are not the

same. Delete the RCU, then

re-add it, using the same

logicaladdressasother

existing paths.

i

4

6005 8732

ToomanySSIDs (OnlyFour

SSIDs are allowed).

The maximum number

of

SSIDs (four) has been

entered. Verify that the

SSIDs are valid, delete

one

or more, then retry the

operation.

E

4

6005 8733

TheFibre-RemoteCopy

function is not installed in

the

speciﬁed MCU.

Please ins

tall

the program

product ke

yinthe MCU.

i

4

6005 8734

TheFibre-RemoteCopy

function is not installed in

the

speciﬁed RCU.

Please install the program

product key in the RCU.

i

4

6005 8735

Invalid RCU serial number,

SSID, Link Address or

Controller ID.

Check the serial number,

SSID and link address

of the RCU, and set the

correct value. Then retry

the

operation. If the same

error occurs, call technical

support.

E

4

6005 8736

The speciﬁed RCU or SSID

contains some Continuous

Access volume pairs.

Delet

eall Continuous

Acces

s

volume pairs of the

spec

iﬁed RCU or SSID, and

retr

ythe operation.

i

4

6005 873 7

An internal error occurred.

Please call technical

support.

E

4

6005 8738

Continuous Access is not

supported under the MCU

Controller emulation type.

The emulation type of the

MCU does not support

Continuous Access. To use

Continuous Access, Please

call

technical support.

i

4

6

005

8

739

NVS status of MCU is not

active.

Th

eMCU NVSstatus

sp

eciﬁed by the host is not

a

ctive. Set the NVS to on

f

or

the MCU , using any

a

ttached host, then retry the

operation.

i

4

6005 8740

NVS status of RCU is not

active.

The RCU NVS status

speciﬁed by the host is not

active. Use any attached

host to set the NVS to on

for the MCU, then retry the

operation.

i

4

6005

87 41

The logical paths between

the

MCU and RCU a re not

established.

Check the path status

between the MCU and the

RCU.

i

4

6005

87 42

Pinned track(s) exists on the

M-VOL.

Check the status of the

M-VOL tracks, and clear the

pinned tracks.

W 4

200

HP

StorageWorks XP Remote Web Console for Storage System Messages and Error Codes