HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6005
87 43
Pinned track(s) exists on the
R-VOL.
Check the status of the
R-VOL tracks, and clear the
pinned tracks.
W 4
6005
87 44
The specified M-VOL
condition is not valid for
Continuous Access.
The M-VOL is not available
for the requested operation,
because of one or more of
the following reasons:
1.
The volume is blocked.
2.
Thevolumeis under
maintenance.
3.
The volume is copying
data (correction copy
or
drive copy).
4.
The volume is correction
access condition.
Check the logical
device status of the
specified M-VOL. If
the M-VOL is either
under maintenance or
copying data, retry
the operation after the
processiscompleted.
W 4
6005
87
45
A volumecannotbeusedas
an
R-VOL when:
• it is used
by Compatible
XRC.
•
it is used by PPRC or
Continuous Access.
• it is
used by Concurrent
Copy.
• it
is in a reserved
condition.
• it
is used by Continuous
Access Journal or
Universal Replicator
for Mainframe.
• it is
used by
ShadowImage
for Mainframe or
Compatible FlashCopy.
Select another volume.
i
4
6005
87 46
Thedeviceemulation type of
the
M-VOL is not supported
by
Continuous Access or
Continuous Access via serial
interface.
Please see the
INSTALL ATION SECTION
and
OPENPLATFORM
SECTION in the
maintenance manual to
confirm whether the device
emulation type of the M-VOL
is
supported by Continuous
Access (via serial interface).
i
4
6005 8747
Current microcode version
does not support the
specified operation.
The version of the microcode
on the
9900 storage
system does not support
the specified function or
operation. Please call
technical support.
i
4
XP24000 Remote Web Console Error Codes
201