HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6005
87 48
Specied M-VOL may be in
use b y HOST.
Data migration cannot
start because the volume is
online. Please vary the path
ofine and retry.
i
4
6005
87 49
Specied R-VOL is still online
from HOST.
Please check if the input
number of R-VOL is correct.
If
not, enter the correct R-VOL
number. If the number is
correct, vary the specied
path ofine.
i
4
6005 8751
Continuous Access is not
supported under the RCU
Controller emulation type, or
the
CT Group is not usable.
Add Pair ope
ration failed.
1.
Conrm the c
ontroller
emulation t
ype, and
see the man
ual.
2.
Conrm the
CT
Group
number in
the
MCU.
i
4
6005 8753
An internal error occurred.
Please call technical
support.
E
4
6005
8754
Invalid MCU serial number
or
MCU SSID.
Check the serial number or
SSID of MCU, then retry
with correct parameter.
E
4
6005 875 5
The se
rial number, SSID or
CU
num
ber of the RCU is
inva
lid.
1. Check the serial
number, SSID or CU
number of the RCU, and
retry the operation with
correct parameters.
2.
Check the connection
LCP ports of the RCU.
Connect the path
correctly, and retry the
operation.
E
4
6005 8756
MCU disk array cache is
not active.
Check the storage system
cache status of the MCU
from the host. If it is off, set
it on
and retry. If it cannot
be
set on, call technical
support.
i
4
6005 875 7
OnesideofMCU Cacheis
blocked.
Please call technical
support.
W 4
6
005
8
758
Unexpected error on MCU.
P
lease
call technical
s
upport.
W 4
6005 875 9
RCU Subsystem Cache
status is not activ e.
Please call technical
support.
i
4
6005 8760
M-VOL and R-VOL T rack
Formats do not match.
Checkthe trackformats of
the
specied M-VOL and
R-VOL.
i
4
6005 8761
The emulation types or the
capacities of M-VOL a nd
R-VOL do not match.
Verify that the emulation
types and the capacities of
the
specied M-VOL and
R-VOL match.
i
4
202
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes