HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6005 8800
The R-VOL is already in use
for Auto LUN.
Verify the status of the
specified R-VOL.
E
4
6005 8801
TheR-VOL is reserved,orthe
RCU or the path between
MCU-RCU is in a heavy
load condition.
Verify the status of the
specified R-VOL. If the
device is not reserved, retry
the operation.
i
4
6005 8802 CT group is not active .
The add pair op
eration
failed bec au
se
the CT
Group is not a
ctive . Add
the CT group
,thenretry the
operation.
E
4
6005 8803
Too many RCUs in this CT
Group.
The add pair operation
failed because there are
toomanyRCUsinthisCT
group. If the timer type is
None, then 4 RCU have
already been added. If
the timer type is Local or
System, then 1 RCU has
already been added. Check
configuration of CT group
numbers already used
on both
MCU and RCU.
Register a new CT group.
i
4
6005
8804
Copy mo de cannot be
changed.
The resume pair operation
failed. The volume and the
copy mode must be either
both asynchronous or both
synchronous. Verify that the
status of thevolumeand
the copy mode match, then
retry the operation.
i
4
6005 8805
CT Group is not active in
the
RCU.
The resume pair operation
failed, because there is no
R-VOL in the CT Group.
Verify the status of the CT
group in the MCU/RCU.
I
f
an M-VOL exists, delete
i
t
and retry the add pair
o
peration.
i
4
6005 8806
CT Group Option cannot be
changed unless deleting or
suspending all asynchronous
pairs in the group.
To change the CT group
option (timer type or time
out), either delete all
asynchronous pairs in the
group, or verify the status of
the RCU CT Group option
and set the same option as
the MCU.
i
4
6005 8807
Too many MCUs in this CT
Group.
The add pair operation
failed because there are
toomanyMCUsinthisCT
group. If the timer type is
System, then 4 MCUs have
already been added. If the
timer
type is local or none,
then 1 MCU has already
been added. Register a
new CT group.
i
4
XP24000 Remote Web Console Error Codes
207