HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6005 885 8
All volumes were not
deleted by the De lete Pair
(Pairsplit-S) operation.
The operation failed for all
of
the volumes, because
either the pair status of
the volume is SEQCHK or
the consistency time of the
volume does not match the
consistency time of the CT
group. Verify the status
of
the failed volumes. If
necessary, retry the Delete
Pair operation with the
volume or the group option.
i
4
6005 8859
Delete Pair (Pairsplit-S)
operationwithC/T option
failed becausesomeR-VOLs
in
the group are in Duplex
(PAIR) or Pending (COPY)
status.
The pair status does not
allow this operation. Refresh
and
confirm the pair status
informationonthe window
first. If the R-VOL status is
valid, retry the operation.
i
4
6005 8860
An internal error occurred.
Please c
all
technical
support
.
E
4
6005 8861
An internal error occurred.
Please call technical
support.
E
4
6005 8862
Please wait a few minutes
and
retry the Delete Pair
(Pairsplit-S) operation.
The delete pair (Pairsplit-S)
operation failed. A few
minutes later, refresh the
screen, confirm if the
specified volumes are in the
permissible status, then retry
the operation.
i
4
6005 886 3
Unk
nown E rror Code.
The Remote Console
computer detected an
unknown error co de. Please
call
technical support.
E
4
6005
8864
An internal error occurred.
Please call technical
support.
E
4
6005 886 5
An internal error occurred.
Please call technical
support.
E
4
6
005
8
866
An internal error occurred.
P
lease call technical
s
upport.
E
4
6005 8867
An internal error occurred.
Please call technical
support.
E
4
6005 886 8
Duplicate CT Group# (A C T
Group has been already
active in MCU).
The operation failed
because a duplicate CT
Group i s already active in
the MCU. Verify the status
of
the CT group and retry
the operation.
E
4
6005 8869 CT Group is not active.
Verify tha t the CT group is
active in the MCU.
E
4
XP24000 Remote Web Console Error Codes
213