HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6005 89 26
The specified R-VOL is
prohibited to use by Volume
Secur ity.
Confirm the status of Volume
Security of the specified
R-VOL.
E
4
6005 89 27
The specified M-VOL is
prohibited to use by Volume
Secur ity.
Confirm the status of Volume
Security of the specified
M-VOL.
E
4
6005 8929
Invalid port type.
Please check t
he
port status
and
retry.
W 4
6005 8930
Logical paths exist on the
RCU port.
Please delete the logical
paths on the specified port
and
retry the operation.
E
4
6005 8931
Logical paths exist on the
RCU port.
Please delete the logical
paths on the specified port
and
retry the operation.
E
4
6005 8932
Since the c
onfiguration
definition of the specified
LDKC number or CU number
does not exist, the logical
paths between MCU and
RCU cannot be established.
Please check whether the
specified LDKC number or
CU
number is defined as
configuration information
for the MCU.
W 0
6005
8934
The Paircreate operation
failed because specified
R-VOL is the NAS system
volume.
Check the configuration of
the
specified R-VOL.
W 4
6005 893 6
The Paircreate operation
failed. The version of the
specified RCU does not
support Continuous Access
with the NAS volume.
Check the microcode
version of the RCU.
W 4
6005 8937
The P
aircreate operation
with
the
fibre-channel
rem
ote copy connection
fai
led
because there are
pai
rs with the serial remote
co
py connectioninthe
sp
ecified MCU.
Plea
se delete all
the pairs
wit
hthe serial remote
cop
y
connection in the
spe
cified MCU, then retry
th
e
operation.
W 4
6005 893 8
The Paircreate operation
with the serial remote copy
connection failed because
there are pairs with the
fibre-channel remote copy
connection i n the specified
MCU.
Please delete all the pairs
with the Fibre Channel
remote copy connection in
the
specified MCU, then
retry the operation.
W 4
6005 8939
The specified M-VOL cannot
be
used.
Check the LUN of the
specified M-VOL by using
RAID Manager, and specify
the
LUN with the value less
than 1,024 for the M-VOL.
W 4
6005
89 40
The operation failed
because the sp ecified
R-VOL is in a Read Only
status by Volume Retention
Manager.
Confirm the status of the
specified R-VOL.
i
4
218
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes