HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
0003 1005
The following volumes
cannot
be specified
when you change path
configurations:
•
Volumes that do not exist
•
Volumes other than top
LUs in expanded LUs
•
Volumes reserved by
Auto LUN
•
Volumes to which the Just
in
Time Storage function
is
applied
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1007
Failed to remove the path.
The specified path is the last
path of the volumes used for
Continuous Access, Business
Copy, Cross-system Copy,
Auto LUN, or XP Snapshot.
Check the setting.
E
6
0003 1009
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
The Confi
guration
information has been
already changed.
Please check the settings
and
req
uest the
setting of the
configuration information
again.
E
6
0003 1010
An error occurred during
SVP processing. If this
problem persists, please call
technical support.
If this problem persists, call
technical supp ort.
E
2
0003 1011
An error occurred. If this
problem persists, please call
technical support.
Thevolumewhich linksas
an expanded LU extends
over CU#. The error does
not
occur normally because
it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
0003 1012
LU path is set to a volume
which links as an expanded
LU.
T
he
Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1013
The emulation types of the
volumes combined into a
LUSE volume are not the
same.
The emulation type of a
volume which links as an
expanded LU is not the
same. The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical supp ort.
E
2
22
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes