HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6010 8101
The system cannot apply the
new configuration. Do you
want to refresh?
Click [Refresh], and retry.
W
5
6010 8928
An error occurred when
copying started.
Please suspend the specified
pair, and perform the
operation to resume the
pair.
W 0
6010 9006
Exchange the
channel
cable
connections after
confirmation of the port
type.
Please follow the instructions
in
the message.
W
5
6010 9007
Please confirm that the
R-VOLs to specify are varied
off-line.
Please confirm that the
R-VOLs to specify are varied
off-line.
W
0
6010 9008
SIMs of Continuous Access
are cleared.
Click [OK].
i
0
6010 9009
The expor
tiscomplete.
Click [OK
].
i
0
6010 9021
The Port Setting process has
not completed. Do you want
to
continue for other ports?
Click [Yes] to continue
processing. After
processing is complete,
reset the port that is not in
operation.
W
5
6010 9022
WARNING: Initial copy
mode None is
selected for
some volume pairs. Are you
sure that the M-VOL and
the
R-VOL of these pairs are
already synchronized?
Check the contents of the
main and
remote volumes.
If the
contents match, click
[OK].Ifnot,click [Cancel].
W
0
6010 9024
Are y
ou
sure you want to
exch
ange the specified
ports? Please c onfi rm the
associated channel paths
are off-line.
Please follow the instructions
in
the message.
W
5
6010 9025
Are you sure you want to
switch the ports? If the
remote copy paths exist
on the
ports, delete them
beforehand.
To continue the operation,
click [OK]. Otherwise, click
[Cancel].
W
5
6010 9026
Are you sure you want to
switch the ports? If any
remote copy paths exist
on the
ports, delete them
beforehand. Also, to avoid
the
switching operation
from being reported as a
failure, confirm firstthata
message
prompting you to
change the channel cab le
connections is displayed,
and then perform the
necessary changes.
To continue the operation,
click [OK]. Otherwise, click
[Cancel].
W
5
6010 9070
Are you sure you want to
delete the
specified RCUs?
To delete the specified RCU,
click [OK]. Otherwise, click
[Cancel].
i
0
228
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes